Installation Sheet

ManualsBrandsElkay ManualsKitchenCrosstown 14.25-in x 28.25-in Stainless Steel Sink Grid

PAGE 1

4405BFFR_FTN_A LK4405BFFR_FTN_A

1000003941 (Rev. D - 03/20)

Owners Manual

Model 4405BFFR

Bottle Filling Freeze Resistant Wall Mounted Tubular Fountain

4405BFFR Fountains are among the easiest to install Fountains on the market today. To assure you install

these models easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE

INSTALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL, AND ALL

OTHER APPLICABLE CODES. After installation, leave these instructions with the Fountain for future reference.

This Freeze Resistant Fountain is shipped in two separate cartons. The second carton contains the Freeze Resistant

Package that are installed on an interior heated wall. The interior space must maintain a minimum temperature of

50° F (10° C). Refer to the Freeze Resistant Package for the rough-in dimensions for installation.

Installer

FINISHED FLOOR

152mm

203mm

178mm

229mm

1/2"

13mm

(4 PL)

1/8"

3mm

19 1/8"

486mm

10"

254mm

14 9/16"

371mm

76mm

27 1/8"

689mm

37 1/8"

943mm

57 1/8"

1451mm

28 3/4"

731mm

1-1/4" DRAIN

32mm

26 1/8"

664mm

Summary of content (6 pages)

PAGE 1
4405BFFR_FTN_A LK4405BFFR_FTN_A Owners Manual Model 4405BFFR Bottle Filling Freeze Resistant Wall Mounted Tubular Fountain m Installer 4405BFFR Fountains are among the easiest to install Fountains on the market today. To assure you install these models easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL, AND ALL OTHER APPLICABLE CODES.
PAGE 2
4405BFFR_FTN_A LK4405BFFR_FTN_A INSTALLATION INSTRUCTIONS IMPORTANT ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON IMPORTANT! INSTALLER PLEASE NOTE. THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE BUILDING.
PAGE 3
PAGE 3 D 7" 178mm B C 1 3/4" 44mm 26 1/8" 664mm 6" 152mm FINISHED FLOOR 29 1/8" 740mm 30 9/16" 776mm 3 1/2" 89mm A 1/8" 3mm 4 5/8" 117mm 13 11/16" 348mm 14 11/16" 373mm 18 3/16" 462mm 12 1/8" 308mm 7 1/4" 184mm 2 5/8" 67mm 3 5/8" 92mm 19 1/8" 486mm PUSH BUTTON CABLE 3" 76mm FINISHED FLOOR 1/8" 12" 305mm 3mm MAX. WALL THICKNESS 8" 203mm 19 1/8" 4405BFFR BOTTLE FILLING FREEZE RESISTANT FOUNTAIN 486mm MOUNTING BOLT AND ACCESS HOLE LAYOUT LEGEND A = MOUNTING BOLT LOCATIONS (4)(1/2" DIA.
PAGE 4
PAGE 4 C 13 11/16" 348mm 14 11/16" 373mm 18 3/16" 462mm 1/8" 2 5/8" 67mm 3 5/8" 92mm 12" 305mm MAX. WALL THICKNESS 8" 203mm FINISHED FLOOR 3" 76mm 57 3/16" 1452mm 37 3/16" 944mm 14 9/16" 371mm 27 1/8" 689mm ADA REQUIREMENT O 10" 254mm 3mm 4405BFFR BOTTLE FILLING 19 1/8"FREEZE RESISTANT FOUNTAIN 486mm ROUGH-IN DRAWINGS 4 5/8" 117mm 1. Wall should already be framed for the fountain using dimensions shown in Fig. 1. Shown dimensions pertain to installation location.
PAGE 5
4405BFFR_FTN_A LK4405BFFR_FTN_A CABLE SHEATH ADJUSTMENT To Increase Free Play To Reduce Free Play FIG. 3 FIG. 4 See Fig. 6 FIG. 5 See Fig. 3 FIG. 6 FIG. 7 PAGE 5 1000003941 (Rev.
PAGE 6
4405BFFR_FTN_A LK4405BFFR_FTN_A 14 ITEMIZED PARTS LIST ITEM NO. PART NO.