Dimensions Guide

GENERAL
Sink is formed of #22 gauge, type 301 series, nickel-bearing stain-
less steel.Topmount.
DESIGN FEATURES
Bowl Depth: See chart on next page
Coved Corners:
D11719: 2-1/2” (64mm) vertical and 2-3/4” (70mm) horizontal radius
D11721, D12521, D(J)12522, DD(J)12522: 4” (102mm) vertical and
3-1/4” (83mm) horizontal radius.
Faucet Deck: Raised (except D11719 and D11721).
Finish: Exposed surfaces are polished to a satin finish.
OTHER
Drain Opening: 3-1/2" (89mm)
N
OPTIONAL ACCESSORIES
Bottom Grid: GBG1414SS (D11719), GBG1415SS (D11721),
GBG2115SS (D12521/D12522/DD12522)
Drain: LK35, D1125
ote: Unless otherwise specified, sink is furnished with 3 or 4
faucet holes as shown.
Model D125224
Model D117193
Elkay
2222 Camden Court
Oak Brook, IL 60523
©2013Elkay
(Rev.9/13) 2 -15K
elkayusa.com
This specification describes an Elkay product with design, q uality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Dayton
®
Single Bowl Sink
Models D, DJ, DD and DDJ Series
S P E C I F I C AT I O N S
U-Channel Type Mounting System
J-Channel Type Mounting System
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.
Installation Hardware: Included for 3/4” (19mm) countertop.
Underside: Undercoated on bottom of bowl
Rim Height: 5/32” (4mm)
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4