Specification

GENERAL
Sink is formed of #22 gauge, 300 series, nickel-bearing stain-
less steel. Top mount.
DESIGN FEATURES
Bowl Depth: See back
Coved Corners:
D11719: 2-1/2” (64mm) vertical and 2-3/4” (70mm) horizontal radius
D11721, D12521, D(J)12522, DD(J)12522: 4” (102mm) vertical and
3-1/4” (83mm) horizontal radius.
Faucet Deck: Raised (except D11719 and D11721).
Finish: Exposed surfaces are polished to a satin finish.
OTHER
Drain Opening: 3-1/2" (89mm)
Note: Unless otherwise specified, sink is furnished with 3 or 4
faucet holes as shown.
Model D125224
Model D117193
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay
(Rev. 7/10) 2-15H
elkayusa.com
In keeping with our policy of continuing produc t improvement, Elkay reserves the right to change
product specifications without notice.
This sp ecification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Dayton
®
Single Bowl Sink
Models D, DJ, DD and DDJ Series
SPECIFICATION S
U-Channel Type Mounting System
J-Channel Type Mounting System
4"
1
2
4" 4" 4"
4" 4"
3
4
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.
Installation Hardware: Included for 3/4” (19mm) countertop.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
Underside: Undercoated on bottom of bowl to reduce
condensation and dampen sound.
SINKS ARE
MADE IN THE USA
Rim Height: 5/32” (4mm)
Hole Drilling Configurations
1-1/2” (38mm) Diameter Faucet Holes 4"(102mm) Center