Specification

GENERAL
Sink is formed of #22 gauge, 300 series, nickel-bearing stain-
less steel. Top mount.
DESIGN FEATURES
Bowl Depth: See next page
Coved Corners: D22519: 2-1/4” (57mm) vertical and horizontal radius
Faucet Deck: Raised (except D22519, D23317 and D23319
series).
Finish: Exposed surfaces are polished to a satin finish.
OTHER
Drain Opening: 3-1/2" (89mm)
Note: Unless otherwise specified, sink is furnished with 4 faucet
holes as shown.
Model D233224
Model D233194
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay
(Rev. 6/10) 2-14G
elkayusa.com
In keeping with our policy of continuing produc t impro vement, Elkay reserves the right to change
product specifications without notice.
This sp ecification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Dayton
®
Double Bowl Sink
Models D, DJ, DD and DDJ Series
SPECIFICATIONS
U-Channel Type Mounting System
J-Channel Type Mounting System
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.
Model D23317
Installation Hardware: Included for 3/4” (19mm) countertop.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
Underside: Undercoated on bottom of bowls to reduce
condensation and dampen sound.
D23317, D23319: 2-1/2” (64mm) vertical and 2-3/4” (70mm) horizontal
D23321, D(J)23322, DD(J)23322: 4” (102mm) vertical and
3-1/4” (83mm) horizontal radius
Rim Height: 3/16” (5mm)
Hole Drilling Configurations
1-1/2” (38mm) Diameter Faucet Holes
1
1
4" 4" 4"
4
4
4" 4"
3
4"4" 4" 4"
5
SINKS ARE
MADE IN THE USA
radius