Dimensions Guide

GENERAL
Sink is formed of #22 gauge, 300 series, nickel-bearing stain-
less steel.Top mount.
DESIGN FEATURES
Bowl Depth: See next page
Coved Corners: D22519: 2-1/4” (57mm) vertical and horizontal radius
Faucet Deck: Raised (except D22519, D23317 and D23319
series).
Finish: Exposed surfaces are polished to a satin finish.
O
Model D233224
M odel D233194
Dayton
®
Double Bowl Sink
Models D, DJ, DD and DDJ Series
S P E C I F I C AT I O N S
M odel D23317
Underside: Undercoated on bottom of bowls
D23317, D23319: 2-1/2” (64mm) vertical and 2-3/4” (70mm) horizontal
D23321, D(J)23322, DD(J)23322: 4” (102mm) vertical and
3-1/4” (83mm) horizontal radius
Rim Height: 3/16” (5mm)
SINK DIMENSIONS (INCHES)*
*Length is left to rigtht. Width is front to back.
**W10 = 10 pack & W50 = 50 pack.
radius
THER
Drain Opening: 3-1/2" (89mm)
OPTIONAL ACCESSORIES
Bottom Grid: GBG1414SS (D23317 & D23319), GBG1415SS
(D23321 & D23322)
Drain: D1125
Installation Hardware: Included for 3/4” (19mm) countertop.
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
L W L W D
A B C D E L W
D22519
-
25 19 10 14 6-1/4 24-3/8 18-3/8
1, 3 or 4
30
(635mm) (483mm) (254mm) (356mm) (159mm) (619mm) (467mm) (762mm)
D23317
-
33 17 14 14 6 32-3/8 16-3/8
NONE
36
(838mm) (432mm) (356mm) (356mm) (152mm) (822mm) (416mm) (914mm)
D23319
-
33 19 14 14 6-7/16 32-3/8 18-3/8
1, 2, MR2, 3, 4 or 5
36
(838mm) (483mm) (356mm) (356mm) (164mm) (822mm) (467mm) (914mm)
D23321
-
33 21-1/4 14 15-3/4 6-1/2 32-3/8 20-5/8
1, 2, MR2, 3, 4 or 5
36
DW1023321
(838mm) (540mm) (35
6mm) (400mm) (165mm) (822mm) (524mm) (914mm)
DW5023321
D23322 DJ23322
33 22 14 15-3/4 6-9/16
32-3/8 21-3/8
1, 2, MR2, 3, 4 or 5
36
DW5023322
DW1023322 DJW1023322
(838mm) (559mm) (356mm) (400mm) (167mm)
(822mm) (543mm) (914mm)
DJW5023322
DD23322
DDJ23322
33 22 14 15-3/4 7-1/16 32-3/8 21-3/8
1, 2, MR2, 3, 4 or 5
36
(838mm) (559mm) (356mm) (400mm) (181mm) (822mm) (543mm) (914mm)
Minumin
Cabinet
Size
J-Channel
Model
Number
U-Channel
Model
Number
Overall Insid
e Each Bowl Cutout in Countertop
(1-1/2" (38mm) Radius Corners)
No of 1-1/2" (38mm)
Dia. Faucet Holes
4"(102mm) Center
Identified sinks are compliant to ADA and ANSI/ICC A117.1
accessibility requirements when installed according to the
requirements outlined in these standards.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of others producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 06/14)
2-14M
elkay.com
®