Dimensions Guide

GENERAL
# 18 (1.2mm) gauge, type 304 stainles steel sinktop with inte-
gral bowls, fan pitched drainboards and backsplash. All
exposed surfaces hand-blended to a Lustrous highlighted
Satin finish. Designed for use with standard size
base cabinet. (Custom sizes are available by contacting an
Elkay Representative.)
DESIGN FEATURES
Bowl Depth: 7-1/2” (191mm).
Coved Corners: 1-3/4” (44mm) radius.
Sintop Thickness: 1-1/2” (38mm).
Backsplash: 4” (10mm2) high, full length, 1/4” (6mm) coved corner.
Outside edge of sink and drainboards have a 5-/32” (4mm)
raised rim.
Drain Opening: 3-1/2” (89mm).
Underside is fully undercoated.
Each Unit has wood mounting strips attached to underside for
fastening top to cabinet.
Stocked in four faucet holes only. Other hole drillings locations
are available made to order.
Lustertone
®
Sink Tops – D Series
Double Bowl – Double Drainboards with
Integral Backsplash
®
S P E C I F I C AT I O N S
Model D6629
Overall Inside Each Bowl Drainboard Minimum
Cabinet
Size
Model
L W L W D L
Drain
Number
A B C D E F Location Location
D6629 66 25 13
1
⁄2 16 7
1
⁄2 18
69
(1753mm)
7
⁄16 L & R Centered
4
(1676mm) (635mm) (343mm) (406mm) (191mm) (468mm)
SINK DIMENSIONS*
* Length is left to right. Width is front to back.
1-3/4"
(44mm) R
1-3/4"
(44mm) R
4"
(102mm)
C C FF
A
6"
(152mm)
E
D
14"
(356mm)
4"
(102mm)
B
5-1/2"
(140mm)
WOOD
STRIP
5/32" (4mm)
7/16"
(11mm)
3/4"
(19mm)
1-1/2"
(38mm)
3/8" (10mm)
DETAIL OF RIM
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of others producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 06/14)
1-153B
elkay.com
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
No. of 1
1
/2” (38mm)
Dia. Faucet Holes
4” (102mm) centers