Spec Sheet

ManualsBrandsElkay ManualsSinkElkay Dayton Premium Collection DSE125221

GENERAL

Sink is formed of #20 gauge, type 301 series, nickel-bearing stain-

less steel. Top mount.

DESIGN FEATURES

Bowl Depth: 8-1/16" (205mm)

Faucet Deck: Raised

Coved Corners: 4" (102mm) vertical and 3-1/4" (83mm) horizontal radius

Underside: Fully undercoated.

OTHER

Drain Opening: 3-1/2".

Note: Unless otherwise specified, sink is furnished with 4 faucet

holes as shown.

Model DSE125224

Elkay

2222 Camden Court

Oak Brook, IL 60523

Printed in U.S.A.

(Rev. 8/12) 2-12J

elkayusa.com

In keeping with our policy of c ontinuing product improvement, Elkay reserves the right to change

product specifications wit hout notice.

This specification describes an Elkay product with design, quality and functional benefits to the

user. When making a comparison of other producers’ offerings, be certain these features are not

overlooked.

Dayton

Elite Single Bowl Sink

Models DSE12522 and DSEJ12522 Series

SPECIFICATIONS

Installation Hardware: Included for 3/4” (19mm) countertop.

SINKS ARE

MADE IN THE USA

Rim Height: 5/32” (4mm)

Finish: Exposed surfaces are polished to an Elite Satin finish.

Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.

These sinks are listed by the International Association

of Plumbing and Mechanical Officials as meeting the

requirements of the Uniform Plumbing Code and the

National Plumbing Code of Canada.

OPTIONAL ACCESSORIES

Bottom Grid: GBG2115SS

Cutting Board: CB1516

Drain: D1125

SINK PACKAGE

FAUCET FEATURES

LK1001CR

- Chrome finished, single-lever kitchen faucet with side spray.

- Flexible supply tubes with 1/2" (13mm) male IPS adapters.

LK5000CR

- Chrome finished, single-lever kitchen faucet with pull-down spray.

- Braided stainless steel supply lines.

Faucets comply with: ADA, ANSI/NSF61, ASME A112.18.1/CSA B125.1,

cUPC, CA AB1953

Faucet flow rate: 1.5 GPM/5.7 L/min at 60 P.S.I.G.

DSE125224DF includes: (1) Sink - DSE125224, (1) Faucet - LK1001CR,

and (1) Drain.

DSE125223DFBG includes: (1) Sink - DSE125223, (1) Faucet - LK5000CR,

(1) Bottom Grid - GBG2115SS, and (1) Drain.

DRAIN FEATURES

Stainless steel body and strainer.

Fits 3-1/2” (89mm) opening.

BOTTOM GRID FEATURES

Nickel-bearing stainless steel

Bright finish

Dishwasher safe

LK1001

LK5000

GBG2115SS

Summary of content (2 pages)

PAGE 1
Dayton® Elite Single Bowl Sink Models DSE12522 and DSEJ12522 Series SPECIFICATIONS GENERAL Sink is formed of #20 gauge, type 301 series, nickel-bearing stainless steel. Top mount. DESIGN FEATURES Bowl Depth: 8-1/16" (205mm) Rim Height: 5/32” (4mm) Faucet Deck: Raised Coved Corners: 4" (102mm) vertical and 3-1/4" (83mm) horizontal radius Finish: Exposed surfaces are polished to an Elite Satin finish. Underside: Fully undercoated. OTHER Drain Opening: 3-1/2".
PAGE 2
Dayton® Elite Single Bowl Sink Models DSE12522 and DSEJ12522 Series SPECIFICATIONS SINK DIMENSIONS (INCHES)* U-Channel Model Number DSE12522 J-Channel Model Number Overall L Cutout in Countertop (1-1/2"(38mm) Radius Corners) Inside Each Bowl W L W D L W No. of 1-1/2” (38mm)Dia. Faucet Holes 4"(102mm) Center 25 22 21 15-3/4 8-1/16 24-3/8 21-3/8 1, 2, MR2, 3, 4 or 5 DSEJ12522 (635mm) (559mm) (533mm) (400mm) (206mm) (619mm)(543mm) Minimum Cabinet Size 30 *Length is left to right.