Operating Guide

Select sinks comply with ASME A112.19.3 except Models
DD12522 and DDJ12522.
Select sinks except Models DD12522 and DDJ12522
are listed by the International Association of Plumbing
and Mechanical Officials as meeting the requirements
of the Uniform Plumbing Code.
G
ENERAL
Sink is formed of #22 gauge, 300 series, nickel-bearing stain-
less steel. Top mount.
DESIGN FEATURES
B
owl Depth: See back.
Coved Corners: 3" vertical.
Faucet Deck: Raised (except D11315, D11719 and D11721).
F
inish: Exposed surfaces are polished to a satin finish.
Underside: Undercoated on bottom of bowls.
OTHER
Drain Opening: 3-1/2".
Note: Unless otherwise specified, sink is furnished with 3 or 4
faucet holes as shown.
Model D125224
Model D117193
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2008 Elkay
(Rev. 6/08) 2-15F
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Dayton
®
Single Bowl Sink
Models D, DJ, DD and DDJ Series
S PECIFI C ATI O N S
U-Channel Type Mounting System
J-Channel Type Mounting System
4"
1
2
4" 4" 4"
4" 4"
3
4
HOLE DRILL
CONFIGURATION
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Model D11315