Specification Sheet

Dayton
®
DG and DDG Series Sink
Models DDG12522, DDG23322,
DG12522 and DG23322
GENERAL
Sink is formed of #20 gauge, 300 series nickel-bearing stainless steel.
Top mount.
DESIGN FEATURES
Bowl Depth: 6-9/16"(167mm) (DGSeries), 7-1/16"(179mm) (DDGSeries).
Coved Corners: 4"(102mm) vertical and 3-1/4"(83mm) horizontal radius.
Faucet Deck: Raised
Rim Height: 3/16"(5mm)
Finish: Exposed surfaces are polished to a satin finish.
Underside: Fully undercoated to reduce condensation and dampen sound.
OTHER
Drain Opening: 3-1/2"(89mm)
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 4/11) 2-35D
elkayusa.com
In keeping with our policy of co ntinuing product impro vement, Elkay reserves the right to change
product specifications without notice.
This sp ecification describes an Elkay p roduct with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
SPECIFICATIONS
Model DG125224/DDG125224
Model DG233224/DDG233224
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
Installation Hardware: Included for 3/4” (19mm) countertop.
SINKS ARE
MADE IN THE USA
4" R
(102mm)
3-1/4" R
(83mm)
15-3/4"
(400mm)
22"
(559mm)
25"
(635mm)
6-9/16"
(167mm)
21"
(533mm)
3-1/4" R
(83mm)
7-1/16"
(179mm)
Model DDG12522 Illustrated
Model DG12522 Illustrated
Model DDG23322 Illustrated
Model DG23322 Illustrated
14"
(356mm)
14"
(356mm)
33"
(838mm)
15-1/4"
(387mm)
6-9/16"
(167mm)
22"
15-3/4"
(400mm)
(559mm)
4" R
(102mm)
3-1/4" R
(83mm)
15-1/4"
(387mm)
7-1/16"
(179mm)
3-1/4" R
(83mm)
Installation Profile
Sink
Screw
Clip
Silicone Caulk
(Not Furnished)
Countertop