Installation Guide

G
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 6/11) 2-9G
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functiona lbenefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
U-Channel Type Mounting System
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.
OPTIONAL ACCESSORIES
Bottom Grid: GBG2115SS
Cutting Board: CB1516 (large bowl), CBS715 (small bowl),
CB816 (small bowll)
Drain: LK35, D1125
C
DE prefix sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
ENERAL
Sink is formed of #22 gauge (DE prefix), or #20 gauge (DSE
prefix), type 301 series,nickel-bearing stainless steel.Top mount.
DESIGN FEATURES
Bowl Depth: 8" (203mm) (large bowl) DSE Series, 6-1/2" (165mm)
(large bowl) DE Series; 5-1/8" (130mm) (small bowl).
Coved Corners: 3" (76mm) vertical (small bowl) and 2-3/4" (70mm)
(large bowl) horizontal radius.
Finish: Exposed surfaces are polished to an elite satin finish.
Underside: Fully undercoated.
OTHER
Drain Opening: 3-1/2" (89mm).
NOTE: Unless otherwise specified, sink is furnished with 4
faucet holes as shown.
Sinks comply with ASME A112.19.3-2008 / CSA B45.4-08.
Model DSEMR23322R
Dayton
®
Elite Double Bowl Sink
Models DEMR23322, DEMR23322R,
DSEMR23322 and DSEMR23322R
SPECIFICATIONS
Model DSEMR23322
SINKS ARE
MADE IN THE USA