Specification Sheet

Dayton
®
DG and DDG Series Sink
Models DDG1 25 2 2 , DDG23322,
DG12522 and DG23322
GENERAL
Sink is formed of #20 gauge, 300 series nickel-bearing stainless steel.
Top mount.
DESIGN FEATURES
Bowl Depth: 6-9/16"(167mm) (DGSeries), 7-1/16"(179mm) (DDGSeries).
Coved Corners: 4"(102mm) vertical and 3-1/4"(83mm) horizontal radius.
Faucet Deck: Raised
Rim Height: 3/16"(5mm)
Finish: Exposed surfaces are polished to a satin finish.
OTHER
Drain Opening: 3-1/2"(89mm)
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 9/14) 2-35
elkay.com
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
S P E C I F I C AT I O N S
Model DG125224/DDG125224
Model DG233224/DDG233224
Installation Hardware: Included for 3/4” (19mm) countertop.
4" R
(102mm)
3-1/4" R
(83mm)
15-3/4"
(400mm)
22"
(559mm)
25"
(635mm)
6-9/16"
(167mm)
21"
(533mm)
3-1/4" R
(83mm)
7-1/16"
(179mm)
Model DDG12522 Illustrated
Model DG12522 Illustrated
Model DDG23322 Illustrated
Model DG23322 Illustrated
14"
(356mm)
14"
(356mm)
33"
(838mm)
15-1/4"
(387mm)
6-9/16"
(167mm)
22"
15-3/4"
(400mm)
(559mm)
4" R
(102mm)
3-1/4" R
(83mm)
15-1/4"
(387mm)
7-1/16"
(179mm)
3-1/4" R
(83mm)
Installation Profile
Sink
Screw
Clip
Silicone Caulk
(Not Furnished)
Countertop
Underside: Undercoated on bottom of bowls to reduce
condensation and dampen sound.
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for most current version of Elkay
product specification sheets.
The DG12522 and DG23322 model sinks are compliant to ADA
and ANSI/ICC A117.1 accessibility requirements when installed
according to the requirements outlined in these standards.