Specification Sheet

SPECIFICATIONS
Lustertone® CuVerro® Antimicrobial Copper
Single Bowl Top Mount Sink
Model(s) DLR172210-CU
In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com
for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.
Elkay REV 03192016 2222 Camden Court © 2016
elkay.com/dlr172210-cu Oak Brook, IL 60523 DLR172210-CU_spec.pdf
PRODUCT SPECIFICATIONS
Lustertone® CuVerro® Antimicrobial Copper Single Bowl Top Mount
Sink. Overall dimensions are 17" x 22" x 10-1/8". Sink is formed
from 18 gauge CuVerro
®
Antimicrobial Copper that combines beauty
and performance to be the only touch surface material registered by
the U.S. Environmental Protection Agency (EPA) to continuously kill
more than 99.9% of bacteria within two hours. Sink has Center drain
placement and Full spray sides and bottom.
Installation Type:
Top Mount
Material:
CuVerro Antimicrobial Copper
Finish:
Lustrous Highlighted Satin
Gauge:
18
Sound Deadening:
Full spray sides and bottom
Number of Bowls:
1
Sink Dimensions:
17" x 22" x 10-1/8"
Bowl 1 Dimensions:
13-1/2" x 16" x 10"
Drain Size:
3-1/2" (89mm)
Drain Location:
Center
Minimum Cabinet Size:
21"
Mounting Hardware:
Part # 64090012 included for
countertops up to 3/4" (19mm) thick
Cutout Template #:
1000001289
Template is available for download at elkay.com
Cutout Dimensions for Top Mount Installation:
16-3/8" x 21-3/8" (416mm x 543mm) with 1-1/2" (38mm) corner
radius
Sinks are listed by IAPMO
®
as meeting the applicable
requirements of the Uniform Plumbing Code
®
, International
Plumbing Code
®
, and National Plumbing Code of Canada.
Product Compliance:
BUY AMERICAN ACT
CSA B45.12/IAPMO Z402
Clean and Care Manual (PDF)
Clean and Care Manual (PDF)
Installation Instructions (PDF)
Limited Lifetime Warranty (PDF)
Hole Drilling Configurations:
PART:________________________________QTY: _____________
PROJECT:______________________________________________
CONTACT:______________________________________________
DATE:__________________________________________________
NOTES:_________________________________________________
APPROVAL:_____________________________________________

Summary of content (2 pages)