Dimensions Guide

Model DLR(Q)2522103
G ourmet Deep Single Bowl Sink
Models DLR and DLRQ, DLRS and DLRSQ Series
®
S P E C I F I C AT I O N S
Quick-Clip
®
Mounting System
U-Channel Type Mounting System
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 10/14)
1-18
elkay.com
Hole Drilling Configurations
1-1/2
" (32mm) Diameter Faucet Holes on 4 " (102mm) Centers
1
2
3
4
5
MR2
OS4
G ENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel. Top Mount.
OTHER
Drain Opening: 3-1/2” (89mm).
DESIGN FEATURES
Bowl Depth: See chart on next page.
Coved Corners: 1-3/4” (44mm) vertical and horizontal radius.
Bowl and Faucet Deck Recess: 3/16” (9mm) below outside
edge of sink
Finish: Exposed surfaces are hand blended to a Lustrous
Highlighted Satin Finish.
Underside: Fully undercoated to dampen sound and prevent
condensation. DLR(Q)191910 and DLR252110 underside is
fully protected by heavy duty Sound Guard
® undercoating.
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4