Spec Sheet

Model DPXSR2250RPD
Elkay
2222 Camden Court
Oak Brook, IL 60523
©2013 Elkay
(Rev. 8/13) SPEC00018
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
GENERAL
Undermount Installation
Designed to affix to the underside of any solid surface countertop.
Top Mount Installation
Sink
Clip
(Included)
Silicone Caulk
(Not Furnished)
Countertop
Countertop
Silicone Caulk
(Not Furnished)
Mounting
Bracket
(Model LKUMB8
sold separately)
Fastener
(Not Furnished)
Sink
SPECIFICATIONS
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with two LKPD1 drain kits, or a garbage disposer
can be installed on the sink bowl for user convenience.
Patent Pending
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)
OPTIONAL ACCESSORIES
Bottom Grid: GOBG1819SS (large bowl), GOBG1118SS (small bowl)
Cutting Board: LKCB1520LTHW (large bowl, top mount),
LKCB1520LUHW (large bowl, undermount)
Mounting Hardware: LK364
Rinsing Basket: LKWRB1819SS (large bowl), LKWERBSS (large bowl)
Utensil Caddy for Rinsing Basket: LKWUCSS
Dayton
®
Premium Double Bowl Sink
with Slim Rim
Model DPXSR2250RPD
Sink is formed of #18 (1.2mm) gauge, 300 series
nickel-bearing stainless steel. Universal mount.
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
DESIGN FEATURES
Slim Rim: Ultra thin edge that virtually eliminates the barrier between the
sink and countertop, allowing for a universal (top or undermount) installation
option.
Bowl Depth: 8" (203mm)
Coved Corners: 1-3/4" (44mm) horizontal radius and 1-3/4" (44mm) and
2” (51mm) vertical radii.
Finish: Exposed surfaces are polished to a Premium Satin Finish.
Underside: Fully undercoated to reduce condensation
and dampen sound.
Screw
(Included)