Specification Sheet

ManualsBrandsElkay ManualsKitchen SinksElkay Dayton 25" Single Basin Drop-In Stainless Steel Kitchen Sink with Kitchen Faucet - Includes Sidespray, Bottom Grid, and Drain

GENERAL

Sink is formed of #20 gauge, 300 series, nickel-bearing stain-

less steel. Top mount.

DESIGN FEATURES

Bowl Depth: 8-1/16" (205mm)

Rim Height: 5/32” (4mm)

Faucet Deck: Raised

Coved Corners: 4" (102mm) vertical and 3-1/4" (83mm) horizontal radius

Finish: Exposed surfaces are polished to an Elite Satin finish.

Underside: Fully undercoated.

OTHER

Drain Opening:

-1/2". (89mm)

Note: Unless otherwise specified, sink is furnished with 4 faucet

holes as shown.

Model DSE125224

Dayton

Elite Single Bowl Sink

Models DSE12522 Series

S P E C I F I C AT I O N S

Installation Hardware: Included for 3/4” (19mm) countertop.

OPTIONAL ACCESSORIES

Bottom Grid: GBG2115SS

Cutting Board: CB1516

Drain: D1125

SINK PACKAGE

FAUCET FEATURES

LK1001CR

- Chrome finished, single-lever kitchen faucet with side spray.

- Flexible supply tubes with 1/2" (13mm) male IPS adapters.

LK5000CR

- Chrome finished, single-lever kitchen faucet with pull-down spray.

- Braided stainless steel supply lines.

Faucets comply with: ADA, ANSI/NSF61, ASME A112.18.1/CSA B125.1,

cUPC, CA AB1953

Faucet flow rate: 1.5 GPM/5.7 L/min at 60 P.S.I.G.

DSE125224DF includes: (1) Sink - DSE125224, (1) Faucet - LK1001CR,

and (1) Drain.

DSE125223DFBG includes: (1) Sink - DSE125223, (1) Faucet - LK5000CR,

(1) Bottom Grid - GBG2115SS, and (1) Drain.

DRAIN FEATURES

Stainless steel body and strainer.

Fits 3-1/2” (89mm) opening.

BOTTOM GRID FEATURES

Nickel-bearing stainless steel

Bright finish

Dishwasher safe

LK1001CR

LK5000CR

GBG2115SS

Sinks are listed by IAPMO as meeting the applicable

requirements of the Uniform Plumbing Code , International

Plumbing Code , and National Plumbing Code of Canada.

Sink complies with ASME A112.19.3/ CSA B45.4

In keeping with our policy of continuing product improvement, Elkay reserves the right to change

product specifications without notice. Please visit elkay.com for the most current version of Elkay

product specification sheets.

This specification describes an Elkay product with design, quality, and functional benefits to the

user. When making a comparison of other producers’ offerings, be certain these features are

not overlooked.

Elkay

2222 Camden Court

Oak Brook, IL 60523

(Rev. 01/15)

2-12

elkay.com

Summary of content (2 pages)

PAGE 1
Dayton® Elite Single Bowl Sink Models DSE12522 Series SP E C I F I C AT I O N S GENERAL Sink is formed of #20 gauge, 300 series, nickel-bearing stainless steel. Top mount. DESIGN FEATURES Bowl Depth: 8-1/16" (205mm) Rim Height: 5/32” (4mm) Faucet Deck: Raised Coved Corners: 4" (102mm) vertical and 3-1/4" (83mm) horizontal radius Finish: Exposed surfaces are polished to an Elite Satin finish. Underside: Fully undercoated. OTHER Drain Opening: 3-1/2".
PAGE 2
Dayton® Elite Single Bowl Sink Models DSE12522 Series SP E C I F I C AT I O N S SINK DIMENSIONS (INCHES)* U-Channel Model Number Overall L Inside Each Bowl W L W D Cutout in Countertop (1-1/2"(38mm) Radius Corners) L W No. of 1-1/2” (38mm)Dia. Faucet Holes 4"(102mm) Center Minimum Cabinet Size 25 22 21 15-3/4 8-1/16 24-3/8 21-3/8 1, 2, MR2, 3, 4 or 5 DSE12522 30 (635mm) (559mm) (533mm) (400mm) (206mm) (619mm)(543mm) (762mm) *Length is left to right.Width is front to back.