Specification

21"
(533mm)
22"
(559mm)
15-3/4"
(400mm)
25"
(635mm)
Bowl Depth is 8-1/16" (206mm)
4"
(102mm)
GENERAL
Sink is formed of #20 gauge, 300 series, nickel-bearing stain-
less steel. Top mount.
DESIGN FEATURES
Bowl Depth: 8-1/16" (205mm)
Faucet Deck: Raised
Coved Corners: 4" (102mm) vertical and 3-1/4" (83mm) horizontal radius
Underside: Fully undercoated t
o reduce condensation and
dampen sound.
OTHER
Drain Opening: 3-1/2".
Note: Unless otherwise specified, sink is furnished with 4 faucet
holes as shown.
Model DSE125224
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay
(Rev. 6/10) 2-12F
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Dayton
®
Elite Single Bowl Sink
Models DSE12522 and DSEJ12522 Series
SPECIFICATIONS
U-Channel J-Channel
Overall
Inside Each Bowl
Minimum
Model Model
Cabinet
Number Number L W
Size
DSE12522 DSEJ12522 1
†
, 2
†
, 3, 4 or 5
†
36
SINK DIMENSIONS (INCHES)*
* Length is left to right. Width is front to back.
†
1, 2 and 5 hole only available for Model DSE12522.
U-Channel Type Mounting System
J-Channel Type Mounting System
Installation Hardware: Included for 3/4” (19mm) countertop.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
1
Hole Drilling Configurations
1-1/2” (38mm) Diameter Faucet Holes 4"(102mm) Center
2
4"
3
4" 4"
5
4"4" 4" 4"
4
4" 4" 4"
SINKS ARE
MADE IN THE USA
25
(635mm)
L W L W D
22
(559mm)
21
(533mm)
15-3/4
(400mm)
8-1/16
(206mm)
24-3/8
(619mm)
21-3/8
(543mm)
No. of 1-1/2”
(38mm)Dia. Faucet
Holes 4"(102mm)
Center
Cutout in
Countertop
(1-1/2"(38mm)
Radius Corners)
Rim Height: 5/32” (4mm)
Finish: Exposed surfaces are polished to an Elite Satin finish.