Spec Sheet

GENERAL
Sink is formed of #20 (.9mm) gauge, 300 series nickel-bearing
stainless steel. Universal mount.
DESIGN FEATURES
Slim Rim: Ultra thin edge that virtually eliminates the barrier between the
sink and countertop, allowing for a universal (top or undermount) installation
option.
Bowl Depths: 8” (203mm).
Coved Corners: 1-3/4" (44mm) horizontal and vertical radii.
Finish: Exposed surfaces are polished to an Elite Satin finish.
Underside: Fully undercoated to reduce condensation and
dampen sound.
Elkay
2222 Camden Court
Oak Brook, IL 60523
©2013 Elkay
(Rev. 6/13) 2-91B
elkayusa.com
Model DSESR12722
SPECIFICATIONS
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
OTHER
Drain opening: 3-1/2" (89mm)
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
OPTIONAL ACCESSORIES
Bottom Grid: GBG2416SS
Cutting Boards: CB1713, CBS1316
Drain: D1125
Mounting Hardware: LK364
Rinsing Basket: LKWRB2416SS, LKWERBSS
Utensil Caddy for Rinsing Basket: LKWUCSS
Dayton
®
Elite Single Bowl Sink
with Slim Rim
Model DSESR12722
Undermount Installation
Designed to affix to the underside of any solid surface countertop.
Top Mount Installation
Sink
Screw
(Included)
Clip
(Included)
Silicone Caulk
(Not Furnished)
Countertop
Countertop
Silicone Caulk
(Not Furnished)
Mounting
Bracket
(Model LKUMB8
sold separately)
Fastener
(Not Furnished)
Sink
For countertops thicker than 3/4” up to 1-1/2”, Elkay recommend using LK364.