Specification Sheet

GENERAL
Sink is formed of #22 gauge, 300 series, nickel-bearing stain-
less steel.Top mount.
DESIGN FEATURES
Bowl Depth: See next page
Coved Corners: D22519: 2-1/4” (57mm) vertical and horizontal radius
D23317, D23319: 2-1/2” (64mm) vertical and 2-3/4” (70mm) horizontal
radius
D23321: 4” (102mm) vertical and
3-1/4” (83mm) horizontal radius
Rim Height: 3/16” (5mm)
Faucet Deck: Raised (except D22519, D23317 and D23319
series).
Finish: Exposed surfaces are polished to a satin finish.
Underside: Undercoated on bottom of bowls
OTHER
Model D233224
M odel D233194
Dayton
®
Double Bowl Sink
Models D and DD Series
S P E C I F I C AT I O N S
M odel D23317
SINK DIMENSIONS (INCHES)*
*Length is left to rigtht. Width is front to back.
**W10 = 10 pack & W50 = 50 pack.
Drain Opening: 3-1/2" (89mm)
Installation Hardware: Included for 3/4” (19mm) countertop.
OPTIONAL ACCESSORIES
Bottom Grid: GBG1414SS (D23317 & D23319), GBG1415SS
(D23321 & D23322)
Drain: D1125
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
L W L W D
A B C D E L W
D22519
25 19 10 14 6-1/4 24-3/8 18-3/8
1, 3 or 4
30
(635mm) (483mm) (254mm) (356mm) (159mm) (619mm) (467mm) (762mm)
D23317
33 17 14 14 6 32-3/8 16-3/8
NONE
36
(838mm) (432mm) (356mm) (356mm) (152mm) (822mm) (416mm) (914mm)
D23319
33 19 14 14 6-7/16 32-3/8 18-3/8
1, 2, MR2, 3, 4 or 5
36
(838mm) (483mm) (356mm) (356mm) (164mm) (822mm) (467mm) (914mm)
D23321
33 21-1/4 14 15-3/4 6-1/2 32-3/8 20-5/8
1, 2, MR2, 3, 4 or 5
36
DW1023321
(838mm) (540m
m) (356mm) (400mm) (165mm) (822mm) (524mm) (914mm)
DW5023321
D23322
33 22 14 15-3/4 6-9/16
32-3/8 21-3/8
1, 2, MR2, 3, 4 or 5
36
DW5023322
DW1023322
(838mm) (559mm) (356mm) (400mm) (167mm)
(822mm) (543mm) (914mm)
DD23322
33 22 14 15-3/4 7-1/16 32-3/8 21-3/8
1, 2, MR2, 3, 4 or 5
36
(838mm) (559mm) (356mm) (400mm) (181mm) (822mm) (543mm) (914mm)
Identified sinks are compliant to ADA and ANSI/ICC A117.1
accessibility requirements when installed according to the
requirements outlined in these standards.
®
Cutout in
Countertop
(1-1/2" (38mm)
Radius Coners
No of 1-1/2” (38mm)
Dia. Faucet Holes
4” (102mm) Center
Inside Each BowlOverall
U-Channel
Model
Number
Minimum
Cabinet
Size
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2015 Elkay
(Rev. 01/15)
2-14
elkay.com