Specification Sheet

GENERAL
Sink is formed of #22 gauge, type 301 series, nickel-bearing stain-
less steel.Top Mount.
DESIGN FEATURES
Bowl Depth: See chart on next page
Coved Corners:
D11719: 2-1/2” (64mm) vertical and 2-3/4” (70mm) horizontal radius
D11721, D12521: 4” (102mm) vertical and
3-1/4” (83mm) horizontal radius.
Rim Height: 5/32” (4mm)
Faucet Deck: Raised (except D11719 and D11721).
Finish: Exposed surfaces are polished to a satin finish.
Underside: Undercoated on bottom of bowl.
OTHER
Drain Opening: 3-1/2" (89mm)
Installation Hardware: Included for 3/4” (19mm) countertop.
OPTIONAL ACCESSORIES
Bottom Grid: GBG1414SS (D11719), GBG1415SS (D11721),
GBG2115SS (D12521/D12522/DD12522)
Drain: LK35, D1125
Model D125224
Model D117193
Dayton
®
Single Bowl Sink
Models D and DD Series
S P E C I F I C AT I O N S
U-Channel Type Mounting System
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
All sinks 6-1/2” or less in depth are compliant to ADA
and ANSI/ICC A117.1 accessibility requirements when installed
according to the requirements outlined in these standards.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2015 Elkay
(Rev. 01/15)
02-15
elkay.com