Dimensions Guide

GENERAL
Sink is formed of #18 gauge, 300 series, nickel-bearing stain-
less steel.Top mount.
DESIGN FEATURES
Bowl Depth: 8-1/8" (206mm) (DXR250R), 8-3/16" (208mm) (DXR2522,
DXR3322).
C oved Corners: 3" (76mm) vertical and 2-1/4" (57mm) horizontal radius.
Faucet Deck: Raised 5/64" (2mm) (DXR2522, DXR3322).
Finish: Exposed surfaces are polished to a satin finish.
Underside: Fully undercoated.
OTHER
Drain Opening: 3-1/2" (89mm).
Note: Unless otherwise specified, sink is furnished with 4 faucet
holes as shown.
Elkay
2222 Camden Court
Oak Brook, IL 60523
©2013 Elkay
(Rev.3/13) 2-34E
elkayusa.com
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Dayton
®
DXR Series Sink
Models DXR2522, DXR3322 and DXR250R
S P E C I F I C AT I O N S
U-Channel Type Mounting System
Model DXR25224
Model DXR33224
Model DXR250R4
SINK DIMENSIONS (INCHES)*
*Length is left to right. Width is front to back.
OPTIONAL ACCESSORIES
Bottom Grid: GBG1318SS (DXR250R) (large bowl), GBG1415SS
(DXR3322, DXR250) (small bowl), GBG2115SS (DXR2522)
Cutting Board: CBR1316 (DXR250R) (large bowl), CB1516
(DXR2522, DXR250R) (small bowl)
Drain: LK35, D1125
L W L W
DXR2522
25
(635mm)
22
(559mm)
24⅜
(619mm)
21⅜
(543mm)
1, 2, MR2, 3, 4, or 5
30
(762mm)
DXR3322
33
(838mm)
22
(559mm)
32⅜
(822mm)
21⅜
(543mm)
1, 2, MR2, 3, 4, or 5
36
(914mm)
L W L W D L W D L W
DXR250R
33
(838mm)
22
(559mm)
13½
(343mm)
18
(457mm)
8⅛
(206mm)
14
(356mm)
15¾
(400mm)
8⅛
(206mm)
32⅜
(822mm)
21⅜
(543mm)
1, 2, S2, 3, or 4
36
(914mm)
Minimum
Cabinet Size
Left Right
8
3/16
(208mm)
8
3/16
(208mm)
21
(533mm)
14
(356mm)
15¾
(400mm)
15¾
(400mm)
Model Number
Model Number
Overall
Inside Each Bow l
Cutout in
Countertop (1½"
(38mm) Radius
Corners)
No. of 1½" (38mm)
Dia. Faucet Holes 4"
(102mm) Centers
W
L
D
Left
Overall
Inside Each Bow l No. of 1½" (38mm)
Dia. Faucet Holes 4"
(102mm) Centers
Minimum
Cabinet Size
Cutout in
Countertop (1½"
(38mm) Radius
Corners)
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visti elkayusa.com for most current version of Elkay
product specification sheets.