Specification Sheet

GENERAL
Sink is formed of #18 (1.2mm) gauge, 300 series nickel bearing
stainless steel. Undermount.
DESIGN FEATURES
Bowl Depth: 8" (203mm).
Underside: Sound dampening pads with spray undercoating to
dampen sound and reduce condensation.
Finish: Exposed surfaces are polished to a Radiant Satin finish.
O THER
Drain Opening: 3-1/2" (89mm).
NOTE: All Dayton undermount sinks are designed to affix easily
to the underside of any solid surface countertop.
O PTIONAL ACCESSORIES
Bottom Grid: GBG2115SS
Drain: D1125
Cutting Board: CB1516 (sink must be installed with a 1/2” reveal
for cutting board to fit properly.
Rinsing Basket: LKWRB2115SS, LKWERBSS
Utensil Caddy: LKWUCSS
Mounting Clip: LKUCLIP8
Template: 64180282
Dayton
®
Undermount Single Bowl Sink
M odel DXUH2115 Series
S P E C I F I C AT I O N S
SINK KIT
FAUCET FEATURES
LK1501CR
- Chrome finished, single-lever kitchen faucet with side spray.
- Flexible supply tubes with 1/2" (13mm) male IPS adapters.
- Two 1 3/8“ diameter faucet holes required.
LK5000CR
- Chrome finished, single-lever kitchen faucet with pull-down spray.
- Braided stainless steel supply lines.
- Three 1 3/8“ diameter faucet holes required.
Max counter thickness: 2.5” (63mm).
Faucets comply with: ADA, ANSI/NSF61, ASME A112.18.1/CSA B125.1,
cUPC, CA AB1953
Faucet flow rate: 1.5 GPM/5.7 L/min at 60 P.S.I.G.
DXUH2115DF includes: (1) Sink - DXUH2115, (1) Faucet - LK1501CR,
and (1) Drain.
DXUH2115DFBG includes: (1) Sink - DXUH2115, (1) Faucet - LK5000CR,
(1) Bottom Grid - GBG2115SS, and (1) Drain.
DRAIN FEATURES
Stainless steel body and strainer.
Fits 3-1/2” (89mm) opening.
BOTTOM GRID FEATURES
Nickel-bearing stainless steel
Bright finish
GBG2115SS
LK5000CR
LK1501CR
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
Model DXUH2115
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are
not overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 07/14)
2-57G
elkay.com