Spec Sheet

Minimum
Model
Overall Inside Bowl
Cabinet
Number L W L W D Size
DXUH2816 30 17
3
/4 28 15
3
/4 8 33
GENERAL
Sink is formed of #18 gauge, type 301 nickel bearing stainless
steel.
DESIGN FEATURES
Bowl Depth: 8".
Underside: Sound dampening pad with spray undercoating to
dampen sound and reduce condensation.
OTHER
Drain Opening: 3-1/2".
NOTE: All Dayton undermount sinks are designed to affix easily
to the underside of any solid surface countertop.
OPTIONAL ACCESSORIES
C
Bottom Grid: GBG2816SS
utting Board: CB1516
(Sink must be installed with a 1/2" reveal for cutting board
to fit properly).
Drain: LK35, D1125
Rinsing Basket: LKWERBSS
Utensil Caddy: LKWUCSS
Model DXUH2816
28"
3-1/2" R
30"
15-3/4"
17-3/4"
2-1/4" R
8"
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 5/11) 2-63F
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version o f Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers
’ offerings, be certain these f eatures are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4.
Dayton
®
Undermount Single Bowl Sink
Model DXUH2816
SPECIFICATIONS
SINK DIMENSIONS (INCHES)*
* Length is left to right. Width is front to back.
SINKS ARE
MADE IN THE USA
Finish: Exposed surfaces are polished to a Radiant Satin finish.
COUNTERTOP
SILICONE CAULK
(NOT FURNISHED)
SINK
1/8" OVERHANG
1-3/8"
+
1/4"
FASTENER
(NOT FURNISHED)
_
1/8" Overhang
COUNTERTOP
1/2"
SILICONE CAULK
(NOT FURNISHED)
SINK
1-1/8"
FASTENER
(NOT FURNISHED)
1/2" Reveal
Electronic Dual Template Mounting Option
(Download DXF File from www.elkayusa.com)
MOUNTING CLIP: LKUCLIP8
(NOT FURNISHED)
MOUNTING CLIP: LKUCLIP8
(NOT FURNISHED)
Mounting Clip: LKUCLIP8
Template: 64180277
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.