Spec Sheet

SINKS ARE
MADE IN THE USA
GENERAL
Sink is formed of #18 (1.2mm) gauge, type 301 nickel bearing
stainless steel.
DESIGN FEATURES
Bowl Depth: 8" (203mm) smallbowl,10" (254mm) largebowl.
Underside: Sound dampening pad with spray undercoating to
dampen soundand reduce condensation.
Finish: Exposed surfaces are polished to a Radiant Satin finish.
OTHER
Drain Openings: 3-1/2" (89mm).
NOTE: All Dayton undermount sinks are designed to affix easily
to the underside of any solid surface countertop.
OPTIONAL ACCESSORIES
Bottom Grid: LKWBG1415SS (small bowl), GBG1415SS
(small bowl), GBG1318SS (large bowl)
Drain: LK35, D1125
Cutting Boards: CB1516 (smallbowl), CBR1316 (largebowl)
(Sink
must be installed with a 1/2" reveal for cutting board to fit properly).
Rinsing Baskets: LKWRB1316SS (smallbowl), LKWRB1318SS
(largebowl), LKWERBSS (either bowl)
Utensil Caddy: LKWUCSS
Mounting Clip: LKUCLIP8 (2 packages required)
Template: 64180279
Model DXUH312010R
Model DXUH312010L
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 8/11) 2-59E
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers
’ offerings, be certain these features are not
overlooked.
Dayton
®
Undermount Double Bowl Sink
Model DXUH312010 Series
SPECIFICATION S
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
SINK PACKAGE
FAUCET FEATURES
LK1501CR
- Chrome finished, single-lever kitchen faucet with side spray.
- Flexible supply tubes with 1/2" (13mm) male IPS adapters.
- Two 1 3/8“ diameter faucet holes required.
LK5000CR
- Chrome finished, single-lever kitchen faucet with pull-down spray.
- Braided stainless steel supply lines.
- Three 1 3/8“ diameter faucet holes required.
Max counter thickness: 2.5” (63mm).
Faucets comply with: ADA, ANSI/NSF61, ASME A112.18.1/CSA B125.1,
cUPC, CA AB1953
Faucet flow rate: 1.5 GPM/5.7 L/min at 60 P.S.I.G.
DXUH312010LDF includes: (1) Sink - DXUH312010L, (1) Faucet - LK1501CR,
and (2) Drains.
DXUH312010RDF includes: (1) Sink - DXUH312010R, (1) Faucet - LK1501CR,
and (2) Drains.
DXUH312010LDFBG includes: (1) Sink - DXUH312010L, (1) Faucet - LK5000CR,
(1) Bottom Grid - GBG1318SS, and (2) Drains.
DXUH312010RDFBG includes: (1) Sink - DXUH312010R, (1) Faucet - LK5000CR,
(1) Bottom Grid - GBG1318SS, and (2) Drains.
DRAIN FEATURES
Stainless steel body and strainer.
Fits 3-1/2” (89mm) opening.
BOTTOM GRID FEATURES
Nickel-bearing stainless steel
Bright finish
Dishwasher safe
LK5000
LK1501
GBG1318SS