Installation Instructions

Installation Instructions
Elkay
Antique Hammered Copper Sinks
Elkay recommends that Antique Hammered Copper sinks be installed by a professional
experienced installer.
WARNING: Since each sink is hand crafted and unique, a cutout template is not
provided.Elkay recommends using the actual sink for the countertop cutout. It is
recommended that you discuss with your customer the desired finished appearance of the
sink and countertop installation. Elkay is not responsible for improper sink and/or
countertop installations.
Elkay undermount sinks should only be fastened to a solid surface countertop (i.e.
granite/Corian
®/Silestone®, etc.)
WARNING: Handle sink with care during the installation. DO NOT drop sink on bowl(s) or
push down on sink when the sink is resting on a flat surface during installation. Doing so
may alter the pitch of the sink bottom and inhibit proper drainage. Elkay is not responsible
for sink or countertop if damaged during installation.
Metal edges may be sharp use caution when handling.
Follow all local plumbing and building codes.
Inspect sink for damage prior to beginning installation.
If installing in granite countertop, make sure that the sink is covered and protected from
any cleaners that the
installer may use to clean the granite, as the cleaners/chemicals can
damage the finish of the sink.
CAREFULLY READ THESE INSTRUCTIONS BEFORE YOU BEGIN
FARMHOUSE SINK INSTALLATION REQUIREMENTS
A custom sink base cabinet is required.
Proper installation requires a coordinated effort including advanced dialog between the
designer (or customer), the cabinet maker, the countertop fabricator and the sink installer
during the design and installation phase.
Elkay recommends providing the cabinet maker with the actual sink to be installed prior to
cabinet fabrication.

Summary of content (2 pages)