Installation Instructions

ManualsBrandsElkay ManualsPlumbingADA Wall Mount Fully Recessed Fountain with Freeze Protection and Front Pushbar: Stainless Steel

97303C (Rev. A - 2/99)

WARNING: This Freeze Resistant Package must be installed on an interior heated wall. The front of the box

must have unobstructed air flow. Failure to maintain the interior wall temperature and the inside of the Freeze

Resistant Package at an above freezing temperature can and will cause damage to the Freeze Resistant

Package. This damage can result in bursting and rupturing of interior plumbing which will result in

uncontrollable water flow and flooding of the area.

Rough-In dimensions will vary depending upon the type of fountain that this package is installed with.

Dimensions shown are for reference only.

LK616A

Freeze Resistant Package

Installation Instructions

FIG. 1

Summary of content (4 pages)

PAGE 1
Installation Instructions LK616A Freeze Resistant Package FIG. 1 WARNING: This Freeze Resistant Package must be installed on an interior heated wall. The front of the box must have unobstructed air flow. Failure to maintain the interior wall temperature and the inside of the Freeze Resistant Package at an above freezing temperature can and will cause damage to the Freeze Resistant Package.
PAGE 2
ALTERNATE IN-WALL INSTALLATION SUPPLY LINE SCREW & CLIP 7 1, 18 28 27 INSULATE WALL CAVITY INSTALLER NOTE: Supply line must slope. Supply water must drain to prevent line freeze up. FIG. 2 INSTALLATION The freeze resistant package may be surface mounted or recessed on an interior wall in a heated area. If recessed, the surface of the cover (Item 6) MUST be flush with the interior wall surface (not recessed). The box is furnished with screws for mounting the cover to the box.
PAGE 3
PARTS LIST ITEM NO. PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 NS NS 10003C 10031C 27051C 27052C 27310C 27312C 27313C 31525003 40045C 40266C 40267C 50198C 50985C 55996C 61313C 62091C 66454C 70021C 70284C 70793C 70817C 70831C 70841C 72000835 72001843 75555C 75559C 70683C A52157 72000833 DESCRIPTION 2 STOP-PUSH BUTTON NUT-RETAINING CHANNEL-PIVOT CHANNEL ASSY VALVE MTG BODY ASSY COVER-BODY WASHER-PUSH ROD O RING-.375 X .239 X .
PAGE 4
TROUBLE SHOOTING AND MAINTENANCE Actuation of Quick Connect Water Fittings: Freeze resistant box is provided with lead-free connectors which utilize an o-ring water seal. To remove tubing from the fittings, relieve water pressure, push in on gray collar while pulling on the tubing (See Fig. 4). To insert tubing, push tube straight into fitting until it reaches a positive stop, approximately 3/4". FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR CALL 1.800.323.