Supplementary Document

97566C (Rev A - 10/17)PAGE 1
LKFRB1
WARNING: This Freeze Resistant Package must be installed on an interior heated wall. The front of the box must
have unobstructed air ow. Failure to maintain the interior wall temperature and the inside of the Freeze Resistant
Package above 50° F (10° C) can and will cause damage to the Freeze Resistant Package. This damage can
result in bursting and rupturing of interior plumbing which will result in uncontrollable water ow and ooding of
the area. Rough-In dimensions will vary depending upon the type of fountain that this package is installed with.
Dimensions shown are for reference only.
LKFRB1
Freeze Resistant Package
Installation Instructions
FIG. 1
18"
457mm
1"
25mm
4 1/2"
114mm
2 5/8"
66mm
3 5/8"
91mm
2 9/16"
64mm
10 15/16"
279mm
3 7/8"
98mm
10 1/8"
257mm
4 7/8"
123mm
12 1/8"
307mm
16"
406mm
15/16"
24mm
2 13/16"
71mm
1 1/2"
38mm
12"
305mm
MAX. WALL
THICKNESS
ALTERNATE IN-WALL
INSTALLATION
2" (51 mm) DIA.
KNOCKOUT
BOTH SIDES
FOR WASTE
LINES
1"" (25mm) DIA.
KNOCKOUT
BOTH SIDES
FOR WATER
SUPPLY
1" (25mm)
AIR GAP, SEE
LOCAL CODES
2"
51mm
1"
25mm
4 5/8"
118mm
WALL
1" (25mm) DIA. SLOT
(ALTERNATE WATER SUPPLY)

Summary of content (4 pages)