Fountain With Flexi-Guard Installation Instructions

97705C (Rev. J - 8/07)
EDFP217C*B EDFP217RAC EDFPVR217C EDFPVR217RAC
PAGE 7
NOTE: WHEN INSTALLING REPLACEMENT
BUBBLER AND PEDESTAL, TIGHTEN NUT
(ITEM 9 OR 20) ONLY TO HOLD PARTS SNUG
IN POSITION. DO NOT OVER TIGHTEN.
FIG. 7
7
8
9
6
19
20
21
FIG. 8
FIG. 9
Installing back panel: When installing back panel (item 16) without mounting plate accessory MP20 or MP20RA, attach (4)
channel braces (item 23) as shown in FIG. 9. Remove the protective backing from the tape installed on the brace. Line up
the corresponding holes in the brace and back panel and press firmly in place.
23
16