Specification Sheet

Elkay Manufacturing Company
www.elkay.com
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©1999 Elkay Mfg. Co.
(Rev. 9/99)
14-33B
SPECIFICATIONS
No Lead Dual Station Drinking Fountain
Wall Mount-Fully Exposed Barrier-Free Access
Model EDFP-220-RC (White Granite)
GENERAL
With a contemporary look and smooth, rounded lines, this wall mounted
drinking fountain is constructed of a premium composite, polyester
material. Available in White Granite.
Contoured basin minimizes splashing and has exclusive Charcoal Gray
colored Flexi-Guard
®
safety bubblers to prevent accidental mouth injuries.
Easy to operate, fully functional chrome plated push buttons are vandal-
resistant. Bottom cover plate included. Patented* valve and in-line flow
regulator provides stream from 20 psi min. to 105 psi max. water supply.
THIS DRINKING FOUNTAIN COMPLIES WITH THE REQUIREMENTS
OF A.D.A. (AMERICANS WITH DISABILITIES ACT) WHEN PROPERLY
INSTALLED.
NO LEAD DESIGN
THIS DRINKING FOUNTAIN COMPLIES WITH THE LEAD-FREE
DEFINITION IN THE SAFE DRINKING WATER ACT OF 1986 AND
LEAD CONTAMINATION CONTROL ACT OF 1988.
Elkay Drinking Fountains are manufactured with a waterway system utilizing
copper components and completely lead-free material. These waterways
have no lead because all leaded materials, such as leaded brass, have
been removed.
This drinking fountain is Classified by Underwriters Laboratories
Inc. in accordance with ANSI/NSF61, Section 9-1997b.
CONSTRUCTION
EDFP-220-RC furnished complete with Flexi-Guard
®
bubblers, fully
assembled front push buttons, patented* valve and in-line flow regulators
(20 psi min. and 105 psi max.), and LK-464 drain and trap assembly.
Bottom cover plate fastened with vandal-resistant screws.
Care and Maintenance of Elkay Composite Fountains
The premium composite fountain provides an extremely durable, nonporous
surface which resists staining. Care is very simple. Routine cleaning with a
soft sponge or cloth, or with water or non-abrasive aerosol foam cleaner, is
all that is normally needed to give many years of trouble free service.
Cleaners left standing on the fountain surface can dull the surface finish. Be
certain to rinse all cleaning agents completely and polish with a soft cloth.
Harsh abrasive cleaners are not required and should not be used.
Mild abrasives such as liquid automotive cleaning compound or baking
soda paste will remove simple scratches and stains. Cigarette burns can
normally be removed without noticeable effect. Deeper scratches or
gouges can be corrected with fine grit sandpaper (240 grit then 400 grit) or
a green scotchbrite pad.
To maintain or regain luster and make cleaning easier, periodic applications
of automobile wax or like products will keep the finish looking like new.
In keeping with our policy of continuing product improvement, Elkay
reserves the right to change product specifications without notice.
37-3/4"
(959 mm)
1-5/8"
(42 mm)
18-1/16"
(459 mm)
7-7/8"
(200 mm)
6-3/4"
(171 mm)
27"
(686 mm)
ADA REQUIREMENT
FINISHED FLOOR LINE
2-15/16"
(74 mm)
* Patent #4,481,971
Model EDFP-220-RC