Specification Sheet

GENERAL
Self-contained, electric refrigerated, floor model water cooler.
Capacity of 50°F drinking water, based upon 80°F inlet water
and 90°F ambient.
Non-pressurized tank system is standard. Non-pressurized
water tank is located after bubbler valve, so that tank is
subject to line pressure only when valve button is pressed.
NO LEAD DESIGN
THIS WATER COOLER COMPLIES WITH THE LEAD-FREE
DEFINITION IN THE SAFE DRINKING WATER ACT OF 1986
AND LEAD CONTAMINATION CONTROL ACT OF 1988.
Elkay Water Coolers are manufactured with a waterway sys-
tem utilizing copper components and completely lead-free
materials. These waterways have no lead because all lead
materials, such as leaded brass, have been removed. All
joints are brazed using silver solder only. No lead solder is
permitted. A strainer with an easily cleanable screen is pro-
vided to allow trapping and convenient removal of water born
particulate of 140 microns and larger prior to their entry into
the water cooler.
These water coolers are certified to
NSF/ANSI 61.
COOLING SYSTEM
Motor Compressor: Hermetically sealed, reciprocating type,
115V, 60 Hertz single phase. Sealed-in lifetime oil supply.
Equipped with electric cord and three prong molded rubber plug.
Condenser: Fan cooled, copper tube with aluminum fins.
(EFA4 has steel tube with steel fins.) Fan motor is permanently
lubricated.
Cooling Unit: Combination tube-tank type. Tube portion is
continuous coil of copper tubing. Fully insulated with EPS
foam which meets Underwriters Laboratories Inc. require-
ments for self extinguishing material.
Refrigerant Control: Refrigerant type HFC-134a is controlled
by accurately calibrated capillary tube for positively trouble-
free performance.
Temperature Control: Enclosed adjustable thermostat is
factory preset. Requires no adjustment other than for
altitude requirements.
CAPACITIES CHART
*Based on 80°F inlet water temperature.
•Pre-cooler capacities based on 60% spill through pre-cooler.
†Glass filler available at extra cost. Require factory preparation to receive glass
filler.
††
EFA16 and EFA20 meet only the lead-free definition of NSF/ANSI 61.
Rated watts shown are based on operational (run) time, in compliance with A.R.I.
Standard 1010 conditions. Specific applications will determine the actual watts
consumed per hour. Watts consumed will be based on number of people
served per hour (usage), ambient temperatures, and inlet water temperature.
Foot pedal available. Factory installed only.
*GPH of 50°F Drinking Water
Full Glass† Ship.
Model Base
Room Temperature °F
Rated Load Filler •Pre- Wt.
Number Rate 70°F80°F90°F Watts Amps Option Cooler Lbs.
EFA4 4.0 4.8 4.4 4.0 230 2.5 Yes No 78
EFA8 7.6 9.2 8.4 7.6 370 4.0 Yes No 81
EFA14 13.5 16.3 14.9 13.5 665 7.2 Yes No 84
††
EFA16 9.6 18.8 17.1 15.5 510 5.5 Yes Yes 87
††
EFA20 12.0 23.6 21.5 19.5 665 7.2 Yes Yes 87
Model EFA4
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2006 Elkay
(Rev. 9/06) 9-2G
elkay.com
CONSTRUCTION
Fountain Top: One piece stainless steel top, polished to a
uniform Elkay bright luster finish. Exclusive Cascade basin,
tested most splash-resistant, features multi-level deck design
with a built-in vandal-resistant strainer.
Exclusive Flexi-Guard
®
Safety Bubbler**: Innovative design
utilizes a pliable polyester elastomer to prevent accidental
mouth injuries. Flexes on impact, then returns to original
position. Strong. Abrasion-resistant. Anti-sweat. Meets UL
requirements and all sanitary codes.
Removable Panel: Removable front panel offers easy acces-
sibility to interior.
Color Selection: Gray Beige vinyl furnished as standard
unless alternate panel color is selected. Alternate panel
colors in vinyl are: Granite, Sandalwood, and Natural Almond.
All furnished at no extra cost. Stainless steel available at extra
cost.
Cabinet: Cabinet design allows for flush to wall mounting or
free standing.
5 YEAR LIMITED WARRANTY on the refrigeration system of
the unit. Electrical components and water system are war-
ranted for 12 months from date of installation. Sample
Certificate available on request.
Elkay Pressure-Type Water Coolers are designed to operate
on 20 psi to 105 psi supply line pressure. If inlet pressure is
above 105 psi, a pressure regulator must be installed in the
supply line. Any damage caused by reason of connecting this
product to supply line pressures lower than 20 psi or higher
than 105 psi is not covered by the warranty.
STANDARDS
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
**Patent #4,481,971
No Lead Floor Model Water Cooler
Air Cooled
Models EFA4, EFA8, EFA14, EFA16 and EFA20
®
SPECIFICATIONS
Elkay Electric Air Cooled Water Coolers meet the
requirements of NSF/ANSI 61. Unit complies with
A.R.I. Standard 1010.