Specification Sheet

Rated in accordance with A.R.I. Standard 1010
and meets all known federal and state plumbing
codes.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
GENERAL
Fully recessed cup dispenser-disposer with push back type
cup filler and integral drain.
Cup dispenser holds 100 4 oz. cups. Access door has cylinder
lock and sight opening. Water dispenser is push back self
closing type. Built-in louver covered drain. Cup dispenser
contains removable receptor for discarded cups behind self
closing door and locked access door.
Wall type, fully recessed, electric refrigerated water cooler
with stainless steel louvered ventilating grill.
Unit furnished with hermetically sealed tube-tank cooling unit
in undersection. Cooling unit removable without disturbing
electrical or drain connections. Condenser, air cooled by fan.
Plumbing and electrical connections are concealed. Entire
unit does not extend more than 1/2" from wall surface.
Flexi-Guard
®
safety bubbler. Control push button located on
front panel below stream projector has in-line flow regulator
from 20 to 105 psi.
THIS WATER COOLER COMPLIES WITH THE REQUIRE-
MENTS OF A.D.A. (AMERICANS WITH DISABILITIES ACT)
PROVIDING PROPER FLOOR SPACE IS AVAILABLE. THIS
UNIT COULD ALSO BE CONSIDERED FOR THE
REQUIREMENT OF A UNIT WHICH WILL SERVICE A
WHEELCHAIR INDIVIDUAL AND PROVIDE SERVICE FOR
A PERSON UNABLE TO BEND OVER TO A WHEELCHAIR
LEVEL COOLER.
NO LEAD DESIGN
THIS WATER COOLER COMPLIES WITH THE LEAD-FREE
DEFINITION IN THE SAFE DRINKING WATER ACT OF
1996.
Elkay Water Coolers are manufactured with a waterway sys-
tem utilizing copper components and completely lead-free
materials. These waterways have no lead because all lead
materials, such as leaded brass, have been removed. All
joints are brazed using silver solder only. No lead solder is
permitted. A strainer with an easily cleanable screen is pro-
vided to allow trapping and convenient removal of waterborne
particulate of 140 microns or larger prior to their entry into the
water cooler.
COOLING SYSTEM
Motor Compressor: Hermetically sealed, reciprocating type,
115V, 60 Hertz single phase. Lubricated for life.
Condenser: Fan cooled. Fan motor is permanently lubricated.
Cooling Unit: Combination tube-tank type. Tube portion is
continuous coil of copper tubing. Fully insulated with EPS
foam.
Refrigerant Control: Refrigerant HFC-134a is controlled by
accurately calibrated capillary tube for positively trouble-free
performance.
Temperature Control: Enclosed adjustable thermostat is
easily accessible by removing front grill panel.
CAPACITIES CHART
*Based on 80°F inlet water temperature. •Pre-cooler capacities based on
60% spill through pre-cooler.
Rated watts shown are based on operational (run) time, in accordance with A.R.I.
Standard 1010 conditions. Specific applications will determine the actual watts
consumed per hour. Watts consumed will be based on number of people
served per hour (usage), ambient temperatures, and inlet water temperature.
*GPH of 50°F Drinking Water
Full Ship.
Model Base
Room Temperature °F
Rated Load •Pre- Wt.
Number Rate 70°F 80°F 90°F Watts Amps Cooler Lbs.
EFRCM8CDC 8.0 9.2 8.6 8.0 325 3.3 Yes 159
EFRCM12CDC 8.0 15.7 13.8 12.0 325 3.3 Yes 160
** Patent #4,481,971
Model EFRCM8CDC
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2003 Elkay
(Rev. 7/03) 10-2G
www.elkayusa.com
CONSTRUCTION
Cup Dispenser–Disposer: 18 gauge, type 304 stainless steel
designed to fit against side of fully recessed water cooler.
Access doors are flush with front surface of frame which con-
tains recessed area containing self closing push back cup
filler, louvered cover drain and LK144 lock and key.
Fountain Top: #16 gauge, type 304 one piece stainless steel.
Anti-splash design has exclusive Cascade basin, tested most
splash-resistant. Fountain has 1-3/4" coved corners.
Exposed surfaces polished to a uniform Elkay luster finish.
Exclusive Flexi-Guard
®
Safety Bubbler**: Innovative design
utilizes a pliable polyester elastomer to prevent accidental
mouth injuries. Flexes on impact, then returns to original posi-
tion. Strong. Abrasion-resistant. Anti-sweat. Meets UL
requirements and all sanitary codes. Keyed in location to
prevent rotation.
Front Panel Grill: Made of type 304 stainless steel, polished
to a uniform Elkay finish. Removable louvered ventilating grill
encloses refrigeration unit and plumbing.
Wall Mounting Box: MB23A mounting box furnished with
each unit. Box allows flush mounting to finished wall,
plumbing and electrical service holes are prepunched on both
right and left side to facilitate installation.
5 YEAR LIMITED WARRANTY on the refrigeration system of
the unit. Electrical components and water system are
warranted for 12 months from date of installation. Sample
Certificate available on request.
Elkay Pressure-Type Water Coolers are designed to operate
on 20 psi to 105 psi supply line pressure. If inlet pressure is
above 105 psi, a pressure regulator must be installed in the
supply line. Any damage caused by reason of connecting this
product to supply line pressures lower than 20 psi or higher
than 105 psi is not covered by the warranty.
STANDARDS
Elkay Electric Air Cooled Water Coolers are listed
by Underwriters Laboratories Inc. and comply with
both Canadian and U.S. requirements.
No Lead Wall Mount Fully-Recessed
Water Cooler with Cup Filler,
Dispenser and Waste Receptacle
Models EFRCM8CDC and EFRCM12CDC
®
SPECIFICATIONS