Specification Sheet

No Lead
Fully Recessed Water Cooler
Barrier-Free Access Model EHFRAM7K
GENERAL
Fully recessed barrier-free stainless steel water cooler has
recessed in-the-wall refrigeration system and stainless steel
grill. All stainless steel polished to a lustrous satin finish.
Fountain has contoured basin to minimize splashing. Flexi-
Guard
®
safety bubbler and easy to operate, fully functional
stainless steel, vandal-resistant front push bar with raised
letters to aid the visually impaired. Patented* valve and in-line
flow regulators provide constant stream from 20 to 105 psi.
Vandal-resistant bottom cover plate.
Energy efficient refrigeration system utilizes a combination tank
continuous-tube type evaporator, refrigerant drier, capillary
tube, and all copper construction.
THIS WATER COOLER COMPLIES WITH THE REQUIRE-
MENTS OF A.D.A. (AMERICANS WITH DISABILITIES ACT)
WHEN PROPERLY INSTALLED.
NO LEAD DESIGN
THIS WATER COOLER COMPLIES WITH THE LEAD-FREE
DEFINITION IN THE SAFE DRINKING WATER ACT OF 1986
AND LEAD CONTAMINATION CONTROL ACT OF 1988.
Elkay Water Coolers are manufactured with a waterway system
utilizing copper components and completely lead-free material.
These waterways have no lead because all lead materials, such
as leaded brass, have been removed. All joints are brazed
using silver solder only. No lead solder is permitted. A strainer
with an easily cleanable screen is provided to allow trapping
and convenient removal of waterborne particulate of 140
microns or larger prior to their entry into the water cooler.
This water cooler is certified to ANSI/NSF61, Section 9-1997b.
COOLING SYSTEM
Motor Compressor: Hermetically sealed, reciprocating type,
115V, 60 Hz single phase. Sealed-in lifetime oil supply.
Equipped with electric cord and three prong molded rubber
plug.
Condenser: Fan cooled, copper tube with aluminum fins. Fan
motor is permanently lubricated.
Cooling Unit: Combination tube-tank type. Self Cleansing.
Tube portion is continuous coil of copper tubing. Tank is
stainless steel. Fully insulated with EPS foam which meets
Underwriters Laboratories requirements for self extinguishing
material.
Temperature Control: Enclosed adjustable thermostat is
factory preset. Requires no adjustment other than for altitude
requirements.
Model EHFRAM7K
®
SPECIFICATIONS
Elkay Manufacturing Company
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2009 Elkay Mfg. Co.
(Rev. 4/09) 12-3J
www.elkay.com
Refrigerant Control: Refrigerant HFC-134a is controlled by
accurately calibrated capillary tube for positively trouble-free
performance.
CONSTRUCTION
Fountain Body: #16 gauge, type 304 nickel bearing stainless
steel polished to a lustrous satin finish with high shined outer
edge. Contoured basin offers large strike area to minimize
splashing. Support arms incorporate unique recess to accept
basins. Fully functional stainless steel push bars are easy to
operate and have raised letters to aid visually impaired. Bottom
cover plate is vandal-resistant.
Exclusive Flexi-Guard
®
Safety Bubbler*: Innovative design
utilizes a pliable polyester elastomer to prevent accidental
mouth injuries. Flexes on impact, then returns to original posi-
tion. Strong. Abrasion-resistant. Anti-sweat. Keyed in location
to prevent rotation.
Front Panel Grill. Made of type 304 stainless steel, polished to
a uniform Elkay satin finish. Removable louvered ventilating
grille encloses refrigeration unit and plumbing.
Wall Mounting Box. MB30 furnished with each unit. Box
allows flush mounting to finished wall, plumbing and electrical
service holes are pre-punched on both right and left side to
facilitate installation.
5 YEAR LIMITED WARRANTY on the refrigeration system of
the unit. Electrical components and water system are
warranted for 12 months from date of installation. Sample
Certificate available on request.
Elkay Pressure-Type Water Coolers are designed to operate on
20 psi to 105 psi supply line pressure. If inlet pressure is above
105 psi, a pressure regulator must be installed in the supply
line. Any damage caused by reason of connecting this product
to supply line pressures lower than 20 psi or higher than 105
psi is not covered by the warranty.
STANDARDS
CAPACITIES CHART
**Based on 80°F inlet water temperature, 90°F room temperature, 50°F drinking
water temperature.
†Glass filler available at extra cost. Requires factory preparation to receive
glass filler.
Rated watts shown are based on operational (run) time, in accordance with A.R.I.
Standard 1010 conditions. Specific applications will determine the actual watts
consumed per hour. Watts consumed will be based on number of people served
per hour (usage), ambient temperatures, and inlet water temperature.
**GPH of 50°F Drinking Water
Full Glass† Ship.
Model Base
Room Temperature °F
Rated Load Compr. Filler Pre- Wt.
Number Rate 70°F 80°F 90°F 100°F Watts Amps HP Option Cooler Lbs.
EHFRAM7K 6.9 7.9 7.5 6.9 6.3 380 4.5 1/5 YES NO 119
Elkay Electric Air Cooled Water Coolers are listed
by Underwriters Laboratories Inc. and comply with
both Canadian and U.S. requirements.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
**Patent #4,481,971
Designed to meet A.R.I. Standard 1010.