Specification

35 3/8"
899mm
ORIFICE HEIGHT
41 3/8"
1051mm
ORIFICE HEIGHT
5/8"
16mm
18 3/4"
476mm
18"
457mm
27"
686mm
ADA
REQUIREMENT
6 1/2"
165mm
3 13/16"
98mm
12 1/8"
309mm
6 5/8"
168mm
38 1/2"
978mm
33"
838mm
24 1/2"
622mm
20 3/8"
518mm
2 1/4"
57mm
2 1/4"
57mm
1-1/4" TRAP FURNISHED
FINISHED FLOOR
FINISHED FLOOR
PRODUCT SPECIFICATION
Two-level wall mounted drinking fountain constructed of #14 gauge, type
304, stainless steel polished to a lustrous satin nish.
Contoured basins minimizes splashing and have vandal-resistant bubblers.
Keyed into location to prevent rotation. Easy to operate, fully functional push
buttons are vandal-resistant. Vandal-resistant bottom cover plates included.
Flow regulator provides constant stream from 20 to 105 psi water pressure.
THIS DRINKING FOUNTAIN COMPLIES WITH THE REQUIREMENTS
OF A.D.A. (AMERICANS WITH DISABILITIES ACT) WHEN PROPERLY
INSTALLED.
NO LEAD DESIGN
THIS DRINKING FOUNTAIN COMPLIES WITH THE LEAD FREE
REQUIREMENTS OF THE U.S. SAFE DRINKING WATER ACT AND ALL
STATE LAWS.
Elkay Drinking Fountains are manufactured with a waterway system utilizing
copper components and lead-free material.
This drinking fountain is certied by WQA to lead-free compliance including
NSF/ANSI 61 and 372.
2222 Camden Court
Oak Brook, IL 60523
630-572-3192
elkay.com
@ 2016 Elkay
SPEC14-50 (Rev 07/2016)
In Keeping with our policy of continuing product improvement, Elkay reserves the right
to change specication without notice. Please visit elkay.com
SPECIFICATIONS
This specication describes an Elkay product with design, quality and functional
benets to the user. When making a comparison of other producer’s offerings, be
certain these features are not overlooked.
Heavy Duty 14 Gauge Drinking Fountain
Wall Mount, Fully Exposed
Barrier-Free Access
Models EHWM217C and EHW217C
Model
EHWM217C
CONSTRUCTION
EHW(M)217C furnished complete with vandal-resistant bubblers,
fully assembled front push buttons, ow regulator 20 to 105 psi and
drain, trap assemblies, vandal-resistant 14 gauge bottom cover plates
and surface mounting plate. Trap included.
EHW217C does not include the surface mounting plate. To be
mounted with MPW200 in-wall mounting plate. ML100 in-wall support
legs are optional.
RATED FOR INDOOR AND OUTDOOR USE
Job Name: ____________________________________
Model: _______________________ Qty. ____________
Contact: ______________________________________
Approval Signature: _____________________________
Notes: