Spec Sheet

DESIGN FEATURES
Bowl Depth: 7 - 7/8" (200mm), Overall depth: 9-3 /8" (238mm) (ELU[H]1418)
10" (254mm), Overall depth: 11-1/2" (293mm)(ELU[H]141810).
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 07/11) 1-410
elkayusa.com
Model ELU1418PD
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
®
SP E C I FI C ATI ON S
GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain. Undermount.
OPTIONAL ACCESSORIES
Bottom Grid: LKWOBG1418SS
Cutting Boards: CBR1418, CBS1418 (ELUH models only)
Rinsing Baskets: LKWRB1418SS, LKWERBSS
Utensil Caddy for Rinsing Basket: LKWUCSS
Mounting Clip: LKUCLIP8
SINK PACKAGE(S)
MODEL SINK BOTTOM GRID QTY DRAIN QTY
ELU1418PDBG ELU1418PD LKWOBG1418SS 1 LKPD1 1
ELU141810PDBG ELU141810PD LKWOBG1418SS 1 LKPD1 1
ELUH1418PDBG ELUH1418PD LKWOBG1418SS 1 LKPD1 1
ELUH141810PDBG ELUH141810PD LKWOBG1418SS 1 LKPD1 1
Finish ELU1418: Exposed surfaces are hand blended to a Lustrous Satin finish.
Finish ELUH1418: Exposed surfaces are hand blended to a Lustrous
Highlighted Satin finish.
Model ELU1418PD and ELUH1418PD Series
with Perfect Drain
TM
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with one LKPD1 drain kit, or a garbage disposer
can be installed for user convenience.
Patent Pending
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
SINKS ARE
MADE IN THE USA
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)
Gourmet Undermount Sink