Spec Sheet

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel. Undermount.
DESIGN FEATURES
Bowl Depth: 12" (305mm).
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Underside: Underside of sink is fully protected by heavy duty
Sound Guard
®
undercoating to reduce condensation and
dampen sound.
OTHER
Drain Opening: 3-1/2" (89mm).
Note: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Installation: See illustrated profile below.
OPTIONAL ACCESSORIES
Cutting Boards: CB1713, CBS1316
Drain: LK99
Rinsing Baskets: LKWRB1418SS, LKWERBSS
Utensil Caddy for Rinsing Basket: LKWUCSS
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay
(03/10) 1-316A
elkayusa.com
Model ELUH191612
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com fo r most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
12"
(305mm)
21-1/2"
(546mm)
18-1/2"
(470mm)
19"
(483mm)
16"
(406mm)
5"
(127mm)
1-3/4"
(44mm) R
1-3/4" (44mm) R
COUNTERTOP
SILICONE
CAULK
(NOT
FURNISHED)
SINK
1-1/8"
(29mm)
FASTENER
(NOT FURNISHED)
Installation Profile of ELUH Models
The template provided with each ELUH sink provides the
only type of installation recommended by Elkay.
1/2" (13mm)
SINK DIMENSIONS*
Gourmet
™
Undermount Single Bowl Sink
Model ELUH191612
®
SPECIFICATIONS
Minimum
Model
Overall Inside Bowl
Cutout in Cabinet
Number L W L W D Countertop Size
ELUH191612 21
1
/2 18
1
/2 19 16 12 See 27
(546mm) (470mm) (483mm) (406mm) (305mm) Template** (686mm)
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08
Finish: Exposed surfaces are hand polished to a Lustrous
Highlighted Satin finish.
MOUNTING CLIP: LKUCLIP8
(NOT FURNISHED)
SINKS ARE
MADE IN THE USA
**Template is packed with every sink.
*Length is left to right. Width is front to back.
Mounting Clip: LKUCLIP8
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.