Manualshelf

Spec Sheet

ManualsBrandsElkay ManualsSinks23 1/2 Inch Undermount Single Bowl Stainless Steel Sink with 18-Gauge, 7 1/2 Inch Bowl Depth, Sound Guard, Lustrous Highlighted Satin Finish, Bottom Grid and Perfect Drain
12
DESIGN FEATURES
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
OPTIONAL ACCESSORIES
Bottom Grid: LKWOBG2115SS
Cutting Board (ELUH model only): CB1516
Rinsing Baskets: LKWRB2115SS, LKWERBSS
Utensil Caddy for Rinsing Basket: LKWUCSS
Elkay
2222 Camden Court
Oak Brook, IL 60523
©2013 Elkay
(Rev.07/13) 1-409B
elkayusa.com
Model ELU2115PD
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
®
S P E C I F I C A T I O N S
Mounting Clip: LKUCLIP8
GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain. Undermount.
SINK PACKAGE(S)
MODEL SINK BOTTOM GRID QTY DRAIN QTY
ELU2115PDBG ELU2115PD LKWOBG2115SS 1 LKPD1 1
ELU211510PDBG ELU211510PD LKWOBG2115SS 1 LKPD1 1
ELUH2115PDBG ELUH2115PD LKWOBG2115SS 1 LKPD1 1
ELUH211510PDBG ELUH211510PD LKWOBG2115SS 1 LKPD1 1
Finish ELU2115: Exposed surfaces are hand blended to
a Lustrous Satin finish.
Finish ELUH2115: Exposed surfaces are hand blended to
a Lustrous Highlighted Satin finish.
Model ELU2115 and ELUH2115 Series
with Perfect Drain
TM
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with one LKPD1 drain kit, or a garbage disposer
can be installed for user convenience.
Patent Pending
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
Bowl Depth: See chart on next page.
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)
Gourmet Undermount Sink

Summary of content (2 pages)