Specification

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel. Undermount.
DESIGN FEATURES
OTHER
OPTIONAL ACCESSORIES
Drain: LK99
Rinsing Basket:
Utensil Caddy for Rinsing Basket:
Gourmet™ Undermount Single Bowl Sink
®
SPECIFICATIONS
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay
(Rev. 04/10)
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com fo r most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offer
ings, be cert
ain these features are not
overlooked.
Mounting Clip: LKUCLIP8
ELUH2317 Series
Bottom Grids: LKWOBG2317SS, LKWOBG2317LSS, LKWOBG2317RSS
Cutting Board: LKCB2317HW
LKWUCSS
LKWRB2115SS, LKWERBSS
1-394
Model ELUH2317
COUNTERTOP
SILICONE
CAULK
(NOT
FURNISHED)
SINK
1-1/8"
(29mm)
FASTENER
(NOT FURNISHED)
1/2" (13mm)
MOUNTING CLIP: LKUCLIP8
(NOT FURNISHED)
Installation Profile for ELUH
models for 30” and wider
cabinets
The template provided with each ELUH sink provides the installation
recommended by Elkay for 30” wide cabinets and wider.
Installation Profile for ELUH
models for 27” wide cabinets
(FRONT INSTALLATION VIEW)
COUNTERTOP
1/2” PLYWOOD
OR UNDERLAYMENT
CABINET WALL
OPTIONAL CUTOUT IN
PLYWOOD (OR
UNDERLAYMENT)
COUNTERTOP
1/2” PLYWOOD
OR UNDERLAYMENT
CABINET WALL
FASTENER (AS REQUIRED /
NOT FURNISHED)
OPTIONAL CUTOUT
IN PLYWOOD (OR
UNDERLAYMENT)
1/2" (13mm
) Reveal
Finish: Exposed surfaces are hand polished to a Lustrous Highlighted
Satin finish.
Bowl Depths: 8” (203mm) (ELUH2317); 10” (254mm) (ELUH231710);
12” (305mm) (ELU231712).
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
Drain Opening: 3-1/2" (89mm).
Note: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
SINKS ARE
MADE IN THE USA
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.