Dimensions Guide

ManualsBrandsElkay ManualsKitchen SinksELUH231710R

GENERAL

Highest quality sink formed of #18 (1.2mm) gauge, type 304

(18-8) nickel bearing stainless steel. Undermount.

DESIGN FEATURES

OTHER

Drain Opening: 3-1/2" (89mm).

Note: All Elkay undermount sinks are designed to affix to the

underside of any solid surface countertop.

OPTIONAL ACCESSORIES

Drain: LK99

Rinsing Basket:

Utensil Caddy for Rinsing Basket:

Gourmet™ Undermount Single Bowl Sink

SPECIFICATIONS

Elkay

2222 Camden Court

Oak Brook, IL 60523

Printed in U.S.A.

(Rev. 04/10)

elkayusa.com

In keeping with our policy of continuing product improvement, Elkay reserves the right to change

product specifications without notice. Please visit elkayusa.com fo r most current version of Elkay

product specification sheets.

This specification describes an Elkay product with design, quality and functional benefits to the

user. When making a comparison of other producers’ offer

ings, be cer

tain these features are not

overlooked.

Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.

Finish: Exposed surfaces are hand polished to a Lustrous

Satin finish.

Mounting Clip: LKUCLIP8

ELU2317 Series

Bowl Depths: 8” (203mm) (ELU2317); 10” (254mm) (ELU231710);

12” (305mm) (ELU231712).

Bottom Grids: LKWOBG2317SS, LKWOBG2317LSS, LKWOBG2317RSS

Cutting Board: LKCB2317HW (Fits countertop opening)

LKWUCSS

LKWRB2115SS, LKWERBSS

SINKS ARE

MADE IN THE USA

1-393

Model ELU2317

SEE NEXT PAGE FOR PRODUCT DIMENSIONS.

Underside: Fully protected by

to reduce condensation and dampen sound.

Sound Guard

undercoating

Installation Profile for ELU

models for 30” and wider

The template provided with each ELU sink provides the installation

recommended by Elkay for 30” cabinets and wider.

COUNTERTOP

OVERHANG

APPROX. 1/8”

1/8” COUNTERTOP OVERHANG

COUNTERTOP

FASTENER

(NOT FURNISHED)

MOUNTING CLIP

LKUCLIP8

(NOT FURNISHED)

SINK

SILICONE CAULK

(NOT FURNISHED)

Installation Profile for ELU

models for 27” wide cabinets

COUNTERTOP

1/2” PLYWOOD

OR UNDERLAYMENT

CABINET WALL

OPTIONAL CUTOUT IN

PLYWOOD (OR

UNDERLAYMENT)

COUNTERTOP

1/2” PLYWOOD

OR UNDERLAYMENT

CABINET WALL

FASTENER (AS REQUIRED /

NOT FURNISHED)

OPTIONAL CUTOUT

IN PLYWOOD (OR

UNDERLAYMENT)

Summary of content (2 pages)

PAGE 1
® Gourmet™ Undermount Single Bowl Sink ELU2317 Series SPECIFICATIONS GENERAL Highest quality sink formed of #18 (1.2mm) gauge, type 304 (18-8) nickel bearing stainless steel. Undermount. DESIGN FEATURES Bowl Depths: 8” (203mm) (ELU2317); 10” (254mm) (ELU231710); 12” (305mm) (ELU231712). Finish: Exposed surfaces are hand polished to a Lustrous Satin finish. Underside: Fully protected by Sound Guard ® undercoating to reduce condensation and dampen sound. OTHER Drain Opening: 3-1/2" (89mm).
PAGE 2
Gourmet™ Undermount Single Bowl Sink ELU2317 Series ® SPECIFICATIONS SINK DIMENSIONS* Overall Model Number L W L Inside Bowl W Cutout in Countertop D 3 1/2” drain opening (see below for details) Minimum Cabinet Size ELU2317 24-1/2” 18-1/4” 23” 8” See 16-3/4” (622mm) (464mm) (584mm) (425mm) (203mm) Template** Rear Center 27”/30” † (686mm/762mm) ELU2317L 23” 8” See 24-1/2” 18-1/4” 16-3/4” (622mm) (464mm) (584mm) (425mm) (203mm) Template** Rear Left 27”/30” † (686mm/762mm) ELU2317R 23” 8”