Dimensions Guide

Model ELUH2416
®
S P E C I F I C AT I O N S
Gourmet Undermount Sink
Model ELUH2416 Series
GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304 (18-8) nickel
bearing stainless steel. Undermount.
DESIGN FEATURES
Bowl Depth: See chart on next page.
C oved Corners: 1-3/4" (44mm) horizontal and vertical radii.
Finish ELUH2416(10): Exposed surfaces are hand blended to
a Lustrous Highlighted Satin finish.
Underside: Fully protected by Sound Guard
®
undercoating to reduce
condensation and dampen sound.
OPTIONAL ACCESSORIES
Bottom Grid: LKWOBG2416SS
Cutting Boards: (Reveal mount only) CB1713, CBS1316
Drain: LK99
Mounting Clip: LKUCLIP8
Rinsing Basket: LKWRB2416SS, LKWERBSS
Utensil Caddy for Rinsing Basket: LKWUCSS
OTHER
Drain opening: 3-1/2" (89mm)
NOTE: All Elkay undermount sinks are designed to affix to the underside of
any solid surface countertop.
Countertop
Silicone Caulk
(Not Furnished)
Sink
1/8" (3mm) (Approx.)
Overhang
1-3/8"
(35mm)
Mounting
Clip: LKUCLIP8
(Not Furnished)
Fastener
(Not Furnished)
1/8" (3mm) Overhang 1/2" (13mm) Reveal
Countertop
Silicone Caulk
(Not Furnished)
1/2" (13mm) Reveal
Sink
1-1/8"
(29mm)
Mounting
Clip: LKUCLIP8
(Not Furnished)
Fastener
(Not Furnished)
Installation Profile
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 08/14)
1-470B
elkay.com
IMPORTANT! ELU / ELUH Update
ELUH models have been redesigned to accommodate 1/2”
reveal and no reveal installation options. ELU models should
be ordered as ELUH.
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4