Dimensions Guide

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain. Undermount.
DESIGN FEATURES
Bowl Depths: See chart on next page.
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
OPTIONAL ACCESSORIES
Bottom Grid: LKWOBG1316SS
Cutting Boards: (All cutting boards for reveal mount only) CB1613,
CB1713, CBR1316, CBS1316
Mounting Clip: LKUCLIP8 (2 packages required)
Rinsing Baskets: LKWRB1316SS, LKWERBSS
Utensil Caddy for Rinsing Basket: LKWUCSS
Model ELUH3118PD
SPEC IF IC ATI ON S
Model ELUH311810RPD
Model ELUH311810LPD
Finish: Exposed surfaces are hand blended to a Lustrous
Highlighted Satin finish.
SINK PACKAGES
MODEL SINK BOTTOM GRID QTY DRAIN QTY
ELUH3118PDBG ELUH3118PD LKWOBG1316SS 1 LKPD1
LKPD1
LKPD1
LKPD1
2
ELUH311810PDBG ELUH311810PD LKWOBG1316SS 1 2
ELUH311810LPDBG ELUH311810LPD LKWOBG1316SS 1 2
ELUH311810RPDBG ELUH311810RPD LKWOBG1316SS 1 2
Gourmet Undermount Sink
Model ELUH3118PD Series
with Perfect Drain
TM
Suffix: L (left) or R (right) denotes location of the small bowl.
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink is shipped with two LKPD1 drain kits, or a garbage disposer
can be installed on either sink bowl for user convenience.
Patent Pending
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 06/14)
1-406A
elkay.com
NEW ELUH Installation Options
ELUH models have been redesigned to accommodate 1/2”
reveal and no reveal installation options.
Underside: Underside of sink is fully protected by heavy duty
Soun d Guard undercoating to reduce condensation and
dampen sound.
®