Specification

SINKS ARE
MADE IN THE USA
GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain. Undermount.
DESIGN FEATURES
Bowl Depths: See chart on next page.
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
OPTIONAL ACCESSORIES
Bottom Grid: LKWOBG1316SS
Cutting Boards: CB1613, CB1713, CBR1316, CBS1316
Mounting Clip: LKUCLIP8 (2 packages required)
Rinsing Baskets: LKWRB1316SS, LKWERBSS
Utensil Caddy for Rinsing Basket: LKWUCSS
Model ELUH3118PD
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 07/11) 1-406
elkayusa.com
SPEC IF IC ATI ON S
Model ELUH311810RPD
Model ELUH311810LPD
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visti elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of others producers offerings, be certain these features are not
overlooked.
Finish: Exposed surfaces are hand blended to a Lustrous
Highlighted Satin finish.
SINK PACKAGES
MODEL SINK BOTTOM GRID QTY DRAIN QTY
ELUH3118PDBG ELUH3118PD LKWOBG1316SS 1 LKPD1
LKPD1
LKPD1
LKPD1
2
ELUH311810PDBG ELUH311810PD LKWOBG1316SS 1 2
ELUH311810LPDBG ELUH311810LPD LKWOBG1316SS 1 2
ELUH311810RPDBG ELUH311810RPD LKWOBG1316SS 1 2
Gourmet Undermount Sink
Model ELUH3118PD Series
with Perfect Drain
TM
Suffix L (left) or R (right) denotes location of the small bowl.
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with two LKPD1 drain kits, or a garbage disposer
can be installed on either sink bowl for user convenience.
Patent Pending
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)
Installation Profile
1/2"(13mm) Reveal
Countertop
Silicone Caulk
(Not Furnished)
1/2" (13mm)
Sink
1-1/8"
(29mm)
Mounting
Clip: LKUCLIP8
(Not Furnished)
Fastener
(Not Furnished)