Spec Sheet

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain. Undermount.
DESIGN FEATURES
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Suffix L (left) or R (right) denotes location of the small bowl.
OPTIONAL ACCESSORIES
Bottom Grids: LKWOBG1418SS (large bowl), LKWOBG1316SS
(small bowl).
Cutting Boards: CBR1418, CBS1418 (large bowl), CB1613,
CB1713, CBR1316, CBS1316 (small bowl).
Mounting Clip: LKUCLIP8 (2
packages required).
Rinsing Baskets: LKWRB1418SS (large bowl), LKWRB1316SS
(small bowl), LKWERBSS (either bowl).
Utensil Caddy for Rinsing Basket: LKWUCSS.
Model ELUH3120RPD
Model ELUH3120LPD
Elkay
2222 Camden Court
Oak Brook, IL 60523
1-405
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications wit hout notice. Please visit elkayusa.c om for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of oth
er producers’ offerings, be certain these features are not
overlooked.
Gourmet Undermount Sink
Models ELUH3120LPD and ELUH3120RPD
®
SPECIFICATIONS
Printed in U.S.A.
©2011 Elkay
(Rev. 07/11)
Finish: Exposed surfaces are hand blended to a Lustrous Highlighted
Satin Finish.
SINK PACKAGE(S)
MODEL SINK BOTTOM GRID QTY DRAIN QTY
ELUH3120LPDBG ELUH3120LPD LKWOBG1418SS 1 LKPD1 2
ELUH3120RPDBG ELUH3120RPD LKWOBG1418SS 1 LKPD1 2
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.
with Perfect Drain
TM
SINKS ARE
MADE IN THE USA
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with two LKPD1 drain kits, or a garbage disposer
can be installed on either sink bowl for user convenience.
Patent Pending
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
Bowl Depth: 7 - 7/8"(200mm), Overall depth: 9-3 /8"(238mm) (Small Bowl)
9-7/8"(251mm), Overall depth: 11-3/8"(289mm)(Large Bowl)
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)