Spec Sheet

Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 07/11) 1-419
elkayusa.com
Model ELUH3220PD
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
®
SP E C I FI C ATI ON S
GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain. Undermount.
OPTIONAL ACCESSORIES
Bottom Grid: LKWOBG1418SS
Cutting Boards: CBR1418, CBS1418
Rinsing Baskets: LKWRB1418SS, LKWERBSS
Utensil Caddy for Rinsing Basket: LKWUCSS
Mounting Clip: LKUCLIP8 (2 packages required)
DESIGN FEATURES
Bowl Depth: See chart on next page.
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Highlighted Satin finish.
Finish: Exposed surfaces are hand blended to a Lustrous
SINKS ARE
MADE IN THE USA
Gourmet Undermount Sink
Model ELUH3220PD and ELUH322010PD
with Perfect Drain
TM
Countertop
Silicone Caulk
(Not Furnished)
Sink
1/8 (3mm) (Approx.)
Overhang
1-3/8"
(35mm)
Mounting
Clip: LKUCLP8
(Not Furnished)
Fastener
(Not Furnished)
Installation Profile
1/8" (3mm) Overhang (ELU Sink)
Designed to affix to the underside of any solid surface countertop.
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with two LKPD1 drain kits, or a garbage disposer
can be installed on either sink bowl for user convenience.
Patent Pending
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)
Installation Profile
1/2"(13mm) Reveal
Countertop
Silicone Caulk
(Not Furnished)
1/2" (13mm)
Sink
1-1/8"
(29mm)
Mounting
Clip: LKUCLIP8
(Not Furnished)
Fastener
(Not Furnished)