Specification

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel. Undermount.
DESIGN FEATURES
Bowl Depths: 9-1/2" (241mm) (large bowl) and 6" (152mm)
(small bowl). Integral ribbed work area is recessed 2" (51mm)
below outside of sink.
Underside: Fully protected by heavy duty Sound Guard
®
undercoating to dampen sound and reduce condensation.
NOTE: All Elkay design undermount sinks are designed to affix
to the underside of any solid surface countert
op.
OTHER
Drain Opening: 3-1/2" (89mm).
Suffix L (left) or R (right) denotes location of the small bowl.
Faucet Holes: Sink and template has 4 faucet holes to be used
as a guide for drilling holes in the countertop (see Figure 1).
Cutting Board: CBP1319L or R provided.
OPTIONAL ACCESSORIES
Rinsing Baskets: LKWRB1618SS, LKWERBSS (large bowl).
Utensil Caddy for Rinsing Basket: LKWUCSS.
Bottom G
rid: LKWOBG1618SS (large bowl).
Cutting Boards: CB1713, CBS1316 (large bowl).
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay
(Rev. 01/10) 1-127G
elkayusa.com
Model ELUH4221L
Model ELUH4221R
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com fo r most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Harmony
®
Undermount Double Bowl
Sink with Ribbed Area
Models ELUH4221L and ELUH4221R
®
SPECIFICATIONS
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
(ELUH Double bowl)
COUNTERTOP
1/2" (13mm)
SILICONE CAULK
(NOT FURNISHED)
SINK
1-1/8"
(29mm)
FASTENER
(NOT FURNISHED)
Installation Profile of ELUH Double Bowl Models
The template provided with each ELUH sink p rovides
the only type of installation recommended by Elkay.
SINK OUTLINE
CUTOUT PROVIDED
BY TEMPLATE
FIGURE 1
Model ELUH4221R Illustrated
SEE OTHER SIDE FOR PRODUCT DIMENSIONS.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08
Finish: Exposed surfaces are hand blended to a Lustrous
Highlighted Satin finish.
SINK PACKAGE(S)
MODEL SINK BOTTOM GRID QTY DRAIN QTY
ELUH4221LDBG ELUH4221L LKWOBG1618SS 1 LK99 1
ELUH4221RDBG ELUH4221R LKWOBG1618SS 1 LK99 1
SINKS ARE
MADE IN THE USA
MOUNTING CLIP: LKUCLIP8
(NOT FURNISHED)
Drain: LK99
Mounting Clip: LKUCLIP8 (2 packages required)