Spec Sheet

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain. Undermount.
DESIGN FEATURES
Bowl Depths : See chart on next page.
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Model ELUHAD131655PD
®
SPECIFICATIONS
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 10/11) 1-420A
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com fo r most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other pro
duc
ers’ offerings, be certain these features are not
overlooked.
Finish: Exposed surfaces are hand blended to a Lustrous Highlighted
Satin finish.
SINKS ARE
MADE IN THE USA
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.
Gourmet Undermount Sink
Model ELUHAD Series - A.D.A. Compliant
with Perfect Drain
TM
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with one LKPD1 drain kit, or a garbage disposer
can be installed on sink bowl for user convenience.
Patent Pending
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO
INTERPRETATION OF A.D.A. REQUIREMENTS.
THE UNOBSTRUCTED KNEE SPACE REQUIRED TO
SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE.
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)