Dimensions Guide

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain. Undermount.
DESIGN FEATURES
Bowl Depths: See chart on next page.
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Model ELUHAD131655PD
®
SPECIFICATIONS
Finish: Exposed surfaces are hand blended to a Lustrous Highlighted
Satin finish.
Gourmet Undermount Sink
Model ELUHAD Series - A.D.A. Compliant
with Perfect Drain
TM
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with one LKPD1 drain kit, or a garbage disposer
can be installed on sink bowl for user convenience.
Patent Pending
THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO
INTERPRETATION OF A.D.A. REQUIREMENTS.
THE UNOBSTRUCTED KNEE SPACE REQUIRED TO
SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE.
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 06/14)
1-420A
elkay.com
Elkay
®
Perfect Drain
™
sinks are designed and
approved for compatible
disposers manufactured by
InSinkErator utilizing the
Quick Lock mounting
configuration. Use of
non-approved disposers
may void Elkay warranty.
InSinkErator, Quick Lock
and the mounting
collar configuration
are trademarks of
Emerson Electric Co.
®
®
NEW ELUH Installation Options
ELUH models have been redesigned to accommodate 1/2”
reveal and no reveal installation options.