Spec Sheet

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain. Undermount.
DESIGN FEATURES
Bowl Depths : See chart on next page.
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
®
SPECIFICATIONS
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(Rev. 10/11) 1-421A
elkayusa.com
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com fo r most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other pro
duce
rs’ offerings, be certain these features are not
overlooked.
Finish: Exposed surfaces are hand blended to a Lustrous Highlighted
Satin finish.
SINKS ARE
MADE IN THE USA
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.
Model ELUHAD311855PD
Model ELUHAD312045RPD
Model ELUHAD Series - A.D.A. Compliant
with Perfect Drain
TM
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with two LKPD1 drain kits, or a garbage disposer
can be installed on either sink bowl for user convenience.
Patent Pending
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
THIS PRODUCT, AS CONSTRUCTED IS SUBJECT TO
INTERPRETATION OF A.D.A. REQUIREMENTS.
THE UNOBSTRUCTED KNEE SPACE REQUIRED TO
SATISFY A.D.A. STANDARDS MAY NOT BE DESIRABLE.
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)
Gourmet Undermount Sink
Elkay
®
Perfect Drain
™
sinks are designed and
approved for compatible
disposers manufactured by
InSinkErator
®
utilizing the
Quick Lock
®
mounting
conguration. Use of
non-approved disposers
may void Elkay warranty.
InSinkErator, Quick Lock
and the mounting
collar conguration
are trademarks of
Emerson Electric Co.