Spec Sheet

GENERAL
Highest quality sink, with integral apron, formed of #18 (1.2mm)
gauge, type 304 (18-8) nickel bearing stainless steel.
Undermount.
DESIGN FEATURES
Bowl Depth: 7-7/8" (200mm).
OTHER
Drain Opening: 3-1/2" (89mm).
Installation: See illustrated profile below.
OPTIONAL ACCESSORIES
Model ELUHF2520
COUNTERTOP
1/2" (13mm)
SILICONE CAULK
(NOT
FURNISHED)
SINK
1-1/8"
(29mm)
FASTENER
(NOT FURNISHED)
Installation Profile of
ELUHF Single Bowl Model
Elkay recommends ELUHF sinks are
installed with a 1/2" (13mm) reveal as shown.
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2010 Elkay
(Rev. 01/10) 1-143D
elkayusa.com
Gourmet
®
Undermount
Single Bowl Sink with Apron
Model ELUHF2520
®
SPECIFICATIONS
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with d esign, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
*Length is left to right. Width is front to back.
SINK DIMENSIONS*
Minimum
Model
Overall Inside Bowl
Cabinet
Number L W L W D Size
ELUHF2520 20
1
/2 21 15
3
/4 7
7
/825
(635mm) (521mm) (533mm) (400mm) (200mm)
Underside: Underside of sink is fully protected by heavy duty
Sound Guard
™
undercoating to reduce condensation and
dampen sound.
Finish: Exposed surfaces are hand blended to a Lustrous
Highlighted Satin finish.
SINK PACKAGE(S)
MODEL SINK BOTTOM GRID QTY DRAIN QTY
ELUHF2520DBG ELUHF2520 LKWOBG2115SS 1 LK99 1
SINKS ARE
MADE IN THE USA
30
(762mm)
MOUNTING CLIP: LKUCLIP8
(NOT FURNISHED)
SEE NEXT PAGE FOR PRODUCT DIMENSIONS.
Apron Height: 8” (203mm).
Coved Corners: 1-3/4” (44mm).
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code.
Bottom Grid: LKWOBG2115SS
Drain: LK99
Rinsing Basket: LKWRB2115SS, LKWERBSS
Utensil Caddy for Rinsing Basket: LKWUCSS
Mounting Clip: LKUCLIP8
Cutting Board: CB1516