Dimensions Guide

GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain.
LKWS1418SS Work Shelf included. Undermount.
DESIGN FEATURES
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Finish: Exposed surfaces are hand blended to a Lustrous (Hightlighted) Satin
finish.
Smart Support System: Located 4-1/2" (114mm) from the top of
the sink in the large bowl to allow use of the LKWS1418SS
Work Shelf.
OPTIONAL ACCESSORIES
Bottom Grid: LKWOBG1418SS
Cutting Boards: CBR1418, CBS1418
Mounting Clip: LKUCLIP8
Rinsing Baskets: LKWRB1418SS, LKWERBSS
Utensil Caddy for Rinsing Basket: LKWUCSS
Elkay
2222 Camden Court
Oak Brook, IL 60523
Printed in U.S.A.
©2011 Elkay
(7/11) 1-426
elkayusa.com
Model ELUHWS1418PD
®
SPECIFICATIONS
ACCESSORIES *
Overall
Model Number Description L W Depth/Thickness Material/Finish
LKWS1418SS Work Shelf 13-13/16" 17-3/4" 1/4" Polished Stainless Steel
(351mm) (451mm) (6mm)
* Length is left to right. Width is front to back.
Model ELUHWS141810PD
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visti elkayusa.com for most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of others producers offerings, be certain these featrues are not
overlooked.
SINKS ARE
MADE IN THE USA
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with one LKPD1 drain kit, or a garbage disposer
can be installed on sink bowl for user convenience.
Patent Pending
C
These sinks are listed by the International Association
of Plumbing and Mechanical Officials as meeting the
requirements of the Uniform Plumbing Code and the
National Plumbing Code of Canada.
Sink complies with ASME A112.19.3-2008 / CSA B45.4-08.
Bowl Depth: 7
- 7/8"(200mm), Overall depth: 9-3 /8"(238mm) (ELUHWS1418PD)
10"(254mm), Overall depth: 11-3/4"(298mm)(ELUHWS141810PD).
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)
Gourmet U ndermount Sink
TM
With Work Shelf and Perfect Drain
Models ELUHWS1418PD and ELUHWS141810PD