Dimensions Guide

Model ELUHWS3120LPD
S P E C I F I C A T I O N S
Model ELUHWS3120RPD
Sink with Drain
Kit Installed
7-9/16"
(192mm)
3-1/2"
(89mm)
Gourmet Undermount Sink
with Work Shelf and Perfect Drain
Models ELUHWS3120LPD and ELUHWS3120RPD
TM
GENERAL
Highest quality sink formed of #18 (1.2mm) gauge, type 304
(18-8) nickel bearing stainless steel with Perfect Drain.
LKWS1418SS Work Shelf included. Undermount.
DESIGN FEATURES
Coved Corners: 1-3/4" (44mm) vertical and horizontal radius.
Finish: Exposed surfaces are hand blended to a Lustrous Highlighted Satin
finish.
Smart Support System: Located 4-1/2" (114mm) from the top of
the sink in the large bowl to allow use of the LKWS1418SS
Work Shelf.
OPTIONAL ACCESSORIES
Bottom Grids: LKWOBG1418SS (large bowl), LKWOBG1316SS
(small bowl).
Cutting Boards: (All cutting boards for Reveal mount only) CBR1418,
CBS1418 (large bowl), CB1613, CB1713,
CBR1316, CBS1316 (small bowl).
Mounting Clip: LKUCLIP8 (2 packages required).
Rinsing Baskets: LKWRB1418SS (large bowl), LKWRB1316SS
(small bowl), LKWERBSS (either bowl).
Utensil Caddy for Rinsing Basket: LK
WUCSS.
ACCESSORIES
*
Overall
Model Number Description Bowl L W Depth/Thickness Material/Finish
LKWS1418SS Work Shelf Large 13-13/16 17-3/4 1/4 Polished Stainless Steel
(351mm) (451mm) (6mm)
* Length is left to right. Width is front to back.
NOTE: All Elkay undermount sinks are designed to affix to the
underside of any solid surface countertop.
Underside: Fully protected by
to reduce condensation and dampen sound.
Sound Guard
®
undercoating
OTHER
Drain opening: 3-3/8" (86mm)
Waste Fitting complies with ASME A112.18.2/CAN/CSA-B125.2
Perfect Drain: Seamlessly welded stainless steel collar eliminates the gap
between a traditional drain and the sink for a sanitary and gap free installation.
Each sink shipped with two LKPD1 drain kits, or a garbage disposer
can be installed on either sink bowl for user convenience.
Patent Pending
Suffix: L (left) or R (right) denotes location of the small bowl.
Bowl Depth: 7
- 7/8" (200mm), Overall depth: 9-3 /8" (238mm) (Small Bowl)
9-7/8" (251mm), Overall depth: 11-3/8" (289mm) (Large Bowl)
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. Please visit elkay.com for the most current version of Elkay
product specification sheets.
This specification describes an Elkay product with design, quality, and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
Elkay
2222 Camden Court
Oak Brook, IL 60523
© 2014 Elkay
(Rev. 06/14)
1-427A
elkay.com
NEW ELUH Installation Options
ELUH models have been redesigned to accommodate 1/2”
reveal and no reveal installation options.