Installation Sheet

Installation Instructions:
Quartz Farmhouse Sinks
1333 Butterfield Road, Suite 200 | Downers Grove, IL 60515 | elkay.com
©2019 Elkay Manufacturing Company (8/19) 1000005326.pdf
• Elkay recommends that undermount sinks be installed by a professional, experienced installer.
• Due to the custom nature of this type of installation, no cutout template is included. Elkay recommends providing
the cabinet maker with the actual sink to be installed prior to the cabinet fabrication. It is recommended that the
sink be installed with an approximately 1/8" sink rim reveal. It is further recommended that the installer(s) discuss
this with the customer and agree that this finished appearance is the desired effect. Elkay is not responsible for
improper sink or countertop installations.
• Proper installation requires a coordinated effort including advanced dialog between the designer (or customer),
the cabinet maker, the countertop fabricator, and the sink installer during the design and installation phase.
• Elkay undermount sinks should only be fastened to a solid surface countertop (i.e. granite / Corian
®
). Elkay
recommends that the sink cutout and mounting holes be cut by the countertop fabricator prior to installation.
• Elkay is not responsible for the sink or countertop if damaged during installation.
• Follow all local plumbing and building codes.
• Inspect sink for damage prior to beginning installation.
Attention Installer:
Installation Profiles
UNDERMOUNT - 1/8" REVEAL
Silicone Caulk
(not furnished)
Mounting Clip
Fastener
(not furnished)
Sink
Countertop
1/8"
(3mm)
32-3/4"
(832mm)
Countertop
Reccessed
1/8" (3mm)
(3 Sides)
18-1/8"
(460mm)
From
Cabinet
Front
Feature for Top Mount version
(not used in Undermount model)
Countertop
Minimal
Gap
Minimal
Gap
Fastener
(not
furnished)
Mounting
Clip
Sink
Profile
Cabinet
Base
Countertop
Sink Profile
Opening in
Countertop
R11/16”
(17mm)
Recommended
Fastener Locations
Cabinet
Front of
Cabinet
Front Panel to
Mount Flush
to Cabinet